TC-P42C2 - Need advice

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • fyca
    Member
    • Sep 2013
    • 18
    • United States
    #21
    Re: TC-P42C2 - Need advice

    Looks like I'll be ordering the SS then. I'll let you know the outcome. It'll probably take a week or so.

    Do you think the bad SS could be causing my 6 blink SOS? from the ERC?

      Comment

      • fyca
        Member
        • Sep 2013
        • 18
        • United States
        #22
        Re: TC-P42C2 - Need advice

        Originally posted by tw2005
        unlikely you have a P-board issue,SS board failure is a common one for this model.
        Alright that's all the re-assurance I need to get ordering.

          Comment

          • tw2005
            Badcaps Legend
            • Oct 2011
            • 6458
            • Australia
            #23
            Re: TC-P42C2 - Need advice

            I just hope you don't end up like the last guy I tried helping when out of the blue the a-board quit on us .

              Comment

              • fyca
                Member
                • Sep 2013
                • 18
                • United States
                #24
                Re: TC-P42C2 - Need advice

                Lets hope that doesn't happen. Atleast if that's the case I can return the SN and SS back to ShopJimmy and sell the PDP.

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • cloo
                    Panasonic ZT60 plasma tv with strange behavior and 8 blink code
                    by cloo
                    I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
                    It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


                    So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
                    After doing a factory reset this problem was gone and the picture was back to...
                    01-06-2025, 06:02 AM
                  • EazyBone
                    Un50cu7000 2 blink oddity *partially solved
                    by EazyBone
                    I write this to maybe help another with this TV.

                    So I aquired this TV a 2023 model. It started the 2 blink reboot problem which indicates bad panel. It was still under warranty and the repair man came by.

                    The Samsung repairman brought a brand new panel and switched my original boards to the new panel. The new panel then had the 2 blink error code. The repair guy said he has seen this and the MAIN board on this model will cause the 2 blink. He then replaced the main/power board (they are both connected) and put it back onto my original panel. Voila it worked.
                    ...
                    03-18-2024, 10:24 PM
                  • Vebririon
                    panasonic TX-P50V10E 6 blink led problem
                    by Vebririon
                    Hi everyone,

                    I'm new here and trying to repair my Panasonic TX-P50V10E plasma TV, which is currently showing the 6 red blink error code.

                    Just for context: I'm used to building PCs and installing modchips in old consoles, but this is my first time trying to fix a TV. I'm French, and while my English is okay, I'm using ChatGPT to help translate and clarify my messages as much as possible — so please forgive any odd phrasing.

                    I'm also not very experienced with using a multimeter, but I'm very motivated and ready to follow instructions carefully and report...
                    05-17-2025, 10:16 AM
                  • Ady2017
                    SMD fuse soldering advice please
                    by Ady2017
                    Hi all. I need to replace an SMD fuse on my camcorder and this is the first time I have had to do any SMD soldering so your advice would be appreciated. Below is a picture of the board that I am working on and I have highlighted the fuse that needs to be replaced. I managed to zoom in to take this picture but the fuse is really tiny and is sandwiched between other components so this is going to be a new milestone for me. I appreciate that I am going to have to buy a new soldering iron if you could advice on what I need please. I was thinking about putting a big soldering iron across the whole...
                    1 Photo
                    11-07-2025, 12:03 PM
                  • pixelcap
                    Pioneer Kuro Pro 111FD 8 red blink error
                    by pixelcap
                    Pioneer Kuro Pro 111FD 8 blink red LED.





                    I have been trying to solve the power-down 8-blink red LED problem with my Pioneer.


                    So far I have replaced the power supply board, and the digital assembly board, I have reconnected the ribbons to all boards, ensuring the connections are good. Even though the problem is the 8 red light error and not the more common 8 blue light error code, I had Kcrownie,
                    based in North Carolina replace the chips that cause the 8 blue LED problem (the main board and audio board) the plasma is still powering...
                    1 Photo
                    10-06-2024, 11:26 PM
                  • Loading...
                  • No more items.
                  Working...