Results of changing uF rating?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • javaman97
    New Member
    • Dec 2006
    • 1
    #1

    Results of changing uF rating?

    I am having a very hard time finding any 3900uF low ESR caps, at least in quantities less than 1000, which I need 4.
    What will be the result of recapping with some 4700uF ones I can get? Or recapping with some 3300uF ones I can get?
    These are in the VRM section powering the AMD Socket A, running 1400Mhz. This is on Soyo K7ADA motherboard
    Tags: None
    • Spacedye69
      Badcaps Veteran
      • Nov 2005
      • 698
      • US
      #2
      Re: Results of changing uF rating?

      I've done that same exact thing until I found some 3900uf. Works fine.

        Comment

        • kc8adu
          Super Moderator
          • Nov 2003
          • 8832
          • U.S.A!
          #3
          Re: Results of changing uF rating?

          panasonic fm 4700@6.3 from digikey.

            Comment

            • Spacedye69
              Badcaps Veteran
              • Nov 2005
              • 698
              • US
              #4
              Re: Results of changing uF rating?

              Sorry, of course using the 4700uf, not the 3300uf. Nichicon HE from Mouser also.

                Comment

                • Topcat
                  The Boss Stooge
                  • Oct 2003
                  • 16958
                  • United States
                  #5
                  Re: Results of changing uF rating?

                  If you're in the US or Canada, I can get you some 4700uF Rubycons. I replace 3900uF caps with 4700uF caps all the time, never had an issue.
                  <--- Badcaps.net Founder

                  Badcaps.net Services:

                  Motherboard Repair Services
                  ----------------------------------------------
                  Badcaps.net Forum Members Folding Team
                  http://folding.stanford.edu/
                  Team : 49813
                  Join in!!
                  Team Stats

                    Comment

                    • SonicSteve
                      Senior Member
                      • Oct 2005
                      • 54
                      #6
                      Re: Results of changing uF rating?

                      I'm confused,
                      I found 3 different lines in the digikey catalog that were 3900 6.3 12.5od low esr. Nichicon, United Chemicon, and panasonic.

                        Comment

                        • japlytic
                          Badcaps Legend
                          • Oct 2005
                          • 2086
                          • Australia
                          #7
                          Re: Results of changing uF rating?

                          Primarily, I prefer to use the E3 series (10, 22, 47), although I also prefer using the E6 series (10, 15, 22, 33, 47, 68) as well.
                          My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • chth96
                              Is it no harm to replace with capacitor without ripple current rating?
                              by chth96
                              When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


                              Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
                              But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
                              Rubycon YK DataSheet (b...
                              04-19-2024, 05:19 AM
                            • quickname
                              Cyberpower 1500AVR UPS repair
                              by quickname
                              I'd like to start out by thanking this forum for providing the info to be able to repair my 15 year old CP1500AVRLCD UPS. Here is all the info I gathered during my trouble-shooting and re-capping.

                              Like clockwork, I've had to replace the SLA batteries every 4 years. It was about that time and the UPS was acting like it needed new batteries... randomly shutting off with AC present, not being able to charge fully, and poor runtime when AC was removed. So, I replaced the batteries but noticed that it was not charging properly.

                              I decided to verify that the batteries were...
                              11-12-2023, 09:57 AM
                            • jean luc ferre
                              display screen problems after changing motherboard
                              by jean luc ferre
                              Hello,
                              First on my laptop i had a motherboard with a pentium 6100 processor. Installing w11 i was blocked on the 23h2 version...impossibility to upgrade toward 24h2 because the SSE4.2 functionnality of the cpu was missing. About displaying and screen looking all was perfect.
                              I changed of motherboard with an intel I3 processor...and now i don't find the previous aspects of the displaying.
                              Now i have a veiled screen and pixels are missing though the graphics parameters have not changed.
                              Desinstalling and reloading the drivers in the same time on the graphic card (intel hd...
                              09-11-2025, 10:28 AM
                            • jason123
                              Sony STR-DN1050 - No video, no BT, No WIFI, and FM is not changing stations
                              by jason123
                              Hello folks,
                              New to Audio equipment - I got this receiver, I connected speakers and I tried to connect to Bluetooth. My phone would not see the receiver (Receiver flashes the BT as if it's trying to pair). Then I put it on FM radio, I get white noise on the speakers. I click the +/- Tuner button, and it moves from saved station 1 through 28, but the frequency is 87.x MHz not changing. At this point, thinking I may need to do a FW upgrade, I connected an HDMI cable to the TV and TV reports "No Signal" - TV "Kind of" sees the receiver (When connected to greyed out port,...
                              05-27-2025, 07:26 AM
                            • DynaxSC
                              Each GPU reballing produces different MATS results, looking for root cause ?
                              by DynaxSC
                              Hi,

                              I have an Nvidia card which makes me wondering, what is the root cause for Mats errors. The story is as follows:

                              1. When I received the card Mats showed one memory with errors.

                              2. Replaced the memory chip, but no change, still same error, so memory chip is ruled out.

                              3. Made a carefull reballing of the GPU, MATS showed 3 memories with errors, the one before, and 2 other new chips.

                              4. Made a second reballing of the GPU and Mats shows again only one memory chip with errors, the same on as in the beginning.

                              5. Made...
                              12-11-2024, 07:44 PM
                            • Loading...
                            • No more items.
                            Working...