Hi there fans of the Supernova 2... I have recently come into ownership of a rack model and it's not working properly. I was hoping that if I describe the issue someone here might be able to point me in a direction.
Okay here goes... It powers on and all the lights flash once then the display shows "Supernova" than it adds "voices 24" and on the next line "O/S version 2.0" as it is changing to that the Part buttons 1-8 and the edit button light up than the display changes to show "Seq 30303 Dist" and on the second line "Prog A049" and a few of the lights are lit. Seems normal enough.
Okay I found out how to play the factory demo and was playing that but didn't mess with any knobs or buttons. There are 3 demo's and I did move from one to another a few times... I let it sit playing one of them and it played for quite some time like that just fine.
Well I turned up the master volume and it just sort of locked up. Display was still lit but no button or knob did anything... volume up/down didn't change anything. I couldn't change any menu or setting.
I used some contact cleaner and cleaned the pot's a bit. After that it seemed to be working correctly (let me add that I am not a musician and have no input source for this - I've only output from the headphone out to powered speakers). I moved around through several menus and discovered that it would make sounds if you hit the part buttons... way cool sounds I might add!!! Okay this is great I'm thinking. Well not so much because now it's back to doing the same thing. I can start it and move a few knobs and then it locks up and won't do anything. If I'm in the demo it freezes on the last sound and just starts looping it (same if I'm hitting a part button). Display is illuminated and all it's just non-responsive. Okay - thoughts? I'd love to get this working and try to put a Casio LK-220 I have into a computer and output Midi to the synth and PLAY!!!
Okay here goes... It powers on and all the lights flash once then the display shows "Supernova" than it adds "voices 24" and on the next line "O/S version 2.0" as it is changing to that the Part buttons 1-8 and the edit button light up than the display changes to show "Seq 30303 Dist" and on the second line "Prog A049" and a few of the lights are lit. Seems normal enough.
Okay I found out how to play the factory demo and was playing that but didn't mess with any knobs or buttons. There are 3 demo's and I did move from one to another a few times... I let it sit playing one of them and it played for quite some time like that just fine.
Well I turned up the master volume and it just sort of locked up. Display was still lit but no button or knob did anything... volume up/down didn't change anything. I couldn't change any menu or setting.
I used some contact cleaner and cleaned the pot's a bit. After that it seemed to be working correctly (let me add that I am not a musician and have no input source for this - I've only output from the headphone out to powered speakers). I moved around through several menus and discovered that it would make sounds if you hit the part buttons... way cool sounds I might add!!! Okay this is great I'm thinking. Well not so much because now it's back to doing the same thing. I can start it and move a few knobs and then it locks up and won't do anything. If I'm in the demo it freezes on the last sound and just starts looping it (same if I'm hitting a part button). Display is illuminated and all it's just non-responsive. Okay - thoughts? I'd love to get this working and try to put a Casio LK-220 I have into a computer and output Midi to the synth and PLAY!!!
Comment