Let me teach you how to do... TV repair!!!

[capwizard]

Let me teach you , the right way to fix TV !!!.........

By: maiseletrônica ......He is the BEST, he speaks Portuguese, I understand only 50%...Instead of change tv modules , he really troubleshooting......

Samsung - UN32F4200
https://www.youtube.com/watch?v=AF3MRfHY4R4&t=837s

Samsung UN32D4000
https://www.youtube.com/watch?v=_aqloiLMEmQ&t=656s

Samsung UN46F6400
https://www.youtube.com/watch?v=nEzBdUTpe24

Samsung LN26B450
https://www.youtube.com/watch?v=fpWjtyLzP6w

[vinceroger69]

Re: Let me teach you how to do... TV repair!!!

They are some good videos well worth watching.

[capwizard]

Re: Let me teach you how to do... TV repair!!!

Maybe, he is a well trained Tech. from Samsung authorized dealer. Anyway, I'm just put the tips in my collections.

[budm]

Re: Let me teach you how to do... TV repair!!!

I sure like to know what kind of camera/micro scope he is using, very nice and clear pictures. I used aluminum foil too.
It is nice to be service center so you have access to all kind of service info.

[capwizard]

Re: Let me teach you how to do... TV repair!!!

Yes, I use aluminum foil from $99 cent store...they tend to give odor, but that is OK for me.......

[ReeceyBurger123]

Re: Let me teach you how to do... TV repair!!!

Im liking it, ahh well my kitchen table does the job fine

[capwizard]

Re: Let me teach you how to do... TV repair!!!

We should subscribe him, and thumbs up "I like this" to support him. Even though we don't understand what's he saying...

Just few more tips... then you do it all by yourself:

Plasma Samsung PL42B450
https://www.youtube.com/watch?v=Bw1QnJ8xFLk&t=10s

Samsung LN40A550
https://www.youtube.com/watch?v=YmZSaQN2ctM

TV LCD Toshiba LC4242
https://www.youtube.com/watch?v=-3LhVZ29pX0

[vinceroger69]

Re: Let me teach you how to do... TV repair!!!

There also some good videos i subscribed to his channel yesterday and the subtitles sort of work in english.

[capwizard]

Re: Let me teach you how to do... TV repair!!!

Do we have same guy as him over Badcaps?

A lots of Badcaps Veterans like budm, ReeceyBurger123....hand by hand, step by step helping people troubleshooting thought out all the necessary processes...... and what happened was.... I ordered the board and tv works good.....Thanks and bye- bye...

For me the most fun part of troubleshooting just begins. Because the cost of tv drop in price and buy the board is cheap than waste your time troubleshooting it, gradually we became a module tech than an electronics engineer.

look! Above 6 TVs had repaired in component level just few necessary part needs to be used. So TV repair still high profit margin business.

Find the probes, lift dust on oscilloscope, let's do it.

[vinceroger69]

Re: Let me teach you how to do... TV repair!!!

ive got a 20 mgz oscilloscope 2 ch but still need to see if it works correctly and learn how to use it etc (just been watching some videos on it today) will also need to order some more probes as the ones i had delivered have hooks on the ends not points/probes.

[diif]

Re: Let me teach you how to do... TV repair!!!

ive got a 20 mgz oscilloscope 2 ch but still need to see if it works correctly and learn how to use it etc (just been watching some videos on it today) will also need to order some more probes as the ones i had delivered have hooks on the ends not points/probes.

Are they the cheap China probes ? Is so, give that end a tug and be surprised.
I found this out yesterday.

[capwizard]

Re: Let me teach you how to do... TV repair!!!

He use Uni-T UTD2102CEX 1G Digital Storage Oscilloscope 100MHz
upgrated from UTD2102CEL
https://www.youtube.com/watch?v=J2WRBTN8wzU

For reference only:
https://www.aliexpress.com/item/UNI-...999.264.kMakG6

I going to buy the same scope like his, but I double about my brain.


The probes is not factory original pic1. He upgraded.

[vinceroger69]

Re: Let me teach you how to do... TV repair!!!

i like his camera set up really clear i wonder what make it is, and yes they are the cheap china probes i will have a look later and see if the ends pull off.

[keeney123]

Re: Let me teach you how to do... TV repair!!!

I am not sure I agree with his soldering technique. I would work just a little crude.

[vinceroger69]

Re: Let me teach you how to do... TV repair!!!

Are they the cheap China probes ? Is so, give that end a tug and be surprised.
I found this out yesterday.

Cheers for that just got in and checked mine you are correct they do have a tip on them thanks for letting me know.

[capwizard]

Re: Let me teach you how to do... TV repair!!!

He DIYs the longer tips for the probe.

This video shows how we can fit a needle on the oscilloscope probe. With smaller and smaller components, it is increasingly difficult to measure your terminals with conventional test leads. With this adaptation it is very easy to position the probe in the component terminal and, in addition, the needle provides a very secure support preventing the tip from slipping and short between the terminals. After adjusting the needle, it is important to handle the probe with extreme care to avoid injury. After watching the video leave a comment, a suggestion or even a criticism, because your opinion is very important so that we can improve or correct the content of this blog.

How to fit a needle on the oscilloscope probe
Como adaptar uma agulha na ponta de prova do osciloscópio
https://www.youtube.com/watch?v=epeRqnD43Ds

contact with me: He teach how to repair TV in São Paulo Brazil.
http://maiseletronica.com.br/?p=1605