Ram for MSI MS-7135?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bigbeark
    Badcaps Veteran
    • Jan 2010
    • 661
    • Canada

    #1

    Ram for MSI MS-7135?

    I finally found my Hakko 936, so I replaced three vented KZG 3300 caps and the board works.

    I tried various ram, but only the slot nearest the CPU would work. If i put a stick in the second slot, no boot. The board is reading a 1GB stick in slot#1 as 524MB. I checked a memory supplier and it says chips should be 128MX4 and the chips are "single stacked". So am I using the wrong ram or is the board defective. Can anyone give me recommendations for RAM for this board MS-7135 v2.0?
  • Dan81
    SNES-powered
    • Oct 2013
    • 1865
    • Romania

    #2
    Re: Ram for MSI MS-7135?

    Originally posted by bigbeark
    I finally found my Hakko 936, so I replaced three vented KZG 3300 caps and the board works.

    I tried various ram, but only the slot nearest the CPU would work. If i put a stick in the second slot, no boot. The board is reading a 1GB stick in slot#1 as 524MB. I checked a memory supplier and it says chips should be 128MX4 and the chips are "single stacked". So am I using the wrong ram or is the board defective. Can anyone give me recommendations for RAM for this board MS-7135 v2.0?
    Replace all the caps near the RAM slots and try again.

    Believe it or not I had a Biostar that would not POST because of bad G-Luxon LZ on the board and replacing them with some good G-Luxon SM (which are equivalent with Teapo SH general purpose caps) brought the board back to life.

    Not my best example, but I still have that board to this day and it still works with a P4 2.8GHz Northwood.
    Main rig:
    Gigabyte B75M-D3H
    Core i5-3470 3.60GHz
    Gigabyte Geforce GTX650 1GB GDDR5
    16GB DDR3-1600
    Samsung SH-224AB DVD-RW
    FSP Bluestorm II 500W (recapped)
    120GB ADATA + 2x Seagate Barracuda ES.2 ST31000340NS 1TB
    Delux MG760 case

    Comment

    Related Topics

    Collapse

    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • m1ch43lzm
      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
      by m1ch43lzm
      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
      05-12-2025, 08:37 PM
    • howardc64
      TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
      by howardc64
      All left and right refers to looking from rear of TV (or looking from front with TV upside down)
      • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
      • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
      ...
      Yesterday, 05:17 PM
    • Hakuu
      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
      by Hakuu
      Hi There,

      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

      More Details

      TV Model - LG OLED77G1PUA

      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
      07-12-2023, 02:37 PM
    • jb_Bak
      Sony xbr-65x900c main board issues?
      by jb_Bak
      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
      Power Board Connector that goes to Main board
      CN6401
      Pin 01 NC
      Pin 02 NC
      Pin 03 "BL_ON": 0V
      Pin 04 "N/C"
      Pin 05 "STBY 3.3V": 3.5V
      Pin 06 "GND": N/C
      Pin 07 "AC_OFF"...
      09-27-2021, 04:52 PM
    • Loading...
    • No more items.
    Working...