URL 16V 270 DN Replacement

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bcphx17
    New Member
    • Oct 2017
    • 4
    • United States
    #1

    URL 16V 270 DN Replacement

    I accidentally pulled out a cap on my R7 250 Power Color video card. The wires are on the board and the cap is detached. The cap has URL 16V 270 DN on it. I am hoping I can replace it but don't know how to find the correct replacement. Can someone advise? I have added a picture of the top of the cap. The length of the cap is 11mm.

    Thanks in advance for any help on this.
    Attached Files
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: URL 16V 270 DN Replacement

      270uF 16V

      X-CON: ULR series capacitor


      LTEC ULR series:
      https://cdn.badcaps-static.com/pdfs/...a76a95785d.pdf
      Attached Files
      Last edited by budm; 10-21-2017, 10:34 PM.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • bcphx17
          New Member
          • Oct 2017
          • 4
          • United States
          #3
          Re: URL 16V 270 DN Replacement

          Much appreciate the quick response. Do you know what the DN characters stand for? Is that manufacture date code?

            Comment

            • Behemot
              Badcaps Legend
              • Dec 2009
              • 4845
              • CZ
              #4
              Re: URL 16V 270 DN Replacement

              X-CON ULR for sure, and the DN is indeed date code. Is it SMD, or THT? Anyway, the card will most likely work fine even without it if you have good enough PSU, it filters +12V input. And there are (usually) more of them too.

              On the other hand manufacturers sometimes save on them and leave blank spots so I fill all of them with some caps from other dead components (boards, graphics cards), it won't harm anything to add some morefiltering and bulk capacitance.
              Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

              Exclusive caps, meters and more!
              Hardware Insights - power supply reviews and more!

                Comment

                Previous template Next

                Related Topics

                Collapse
                • reformatt
                  Macbook Air M2 A2681 Kernel panics after screen replacement
                  by reformatt
                  Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                  It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                  07-31-2025, 08:37 PM
                • the_rem
                  Unknown transformer : how to find a good replacement part ?
                  by the_rem
                  Hello guys,

                  I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

                  I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
                  VEF20FB07BW(2025001A)20110927.pdf
                  https://drive.google.com
                  04-23-2025, 01:48 AM
                • ezenia
                  PS4 controller left stick potentiometer replacement issue
                  by ezenia
                  Hello,

                  Not sure if this is the correct section, but I have a PS4 controller that I am trying to fix. It developed stick drift on the left stick and the usual simpler methods did not fix the problem.

                  So I went on eBay and ordered some replacement potentiometers. https://www.ebay.co.uk/itm/174967976757 is where I got them from.

                  I took the green potentiometers off the replacement sticks and soldered them onto the PCB. Assembled the controller and ran some tests. The drifting was somewhat fixed (not fully in center, but way better than before). However,...
                  09-30-2023, 02:19 PM
                • boosti45
                  Macbook pro logic board replacement parts quesion
                  by boosti45
                  i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180​" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?...
                  08-21-2024, 05:23 AM
                • r2digital
                  klipsch kda-500 amplifier suitable power supply capacitor replacement ?
                  by r2digital
                  I have a klipsch kda-500 that would turn on and allow me to get into the web management but it was picking up a lot of noise from audio sources so i decided to replace the smd caps on the power supply along with radial one. Some one was in here before me and they basically burned the bottom side of the traces off for the radial cap but i was able to repair it without any real problem. I thought i did a good job sourcing out replacement caps but apparently not and now i can't get the power supply to turn on it just constantly try's to keep turning on. Attached is a picture of the power supply before...
                  2 Photos
                  04-18-2024, 03:50 PM
                • Loading...
                • No more items.
                Working...