I have a Macintosh Plus 1Mb with CPU/Memory problems not caused by the PSU. Does anyone know how i can run this thing as a display only? Like for a raspberry Pi?
-
Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit. -
Re: Modding a Mac Plus 1Mb
post a foto of the boards
i think those use 24KHz refresh - so not a very usefull monitor! -
Re: Modding a Mac Plus 1Mb
Here are pictures. The hippy cable is what runs between the logic board and sweep board.
The pins most obvious are the purple one and bottom orange as ground, and top yellow is speaker drive.Attached FilesLast edited by goontron; 05-10-2017, 11:00 PM.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
-
Re: Modding a Mac Plus 1Mb
Blue is 5v. It ties to the CMOS/PRAM battery post through a diode.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
Re: Modding a Mac Plus 1Mb
foto's of the logic board?Comment
-
Re: Modding a Mac Plus 1Mb
Here we go.Attached FilesThings I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
-
Re: Modding a Mac Plus 1Mb
try replacing the ram.
or giving it a damned good clean.
also, replace the electrolytics - they appear to be the only smoothing on the thing!!Comment
-
Re: Modding a Mac Plus 1Mb
Well, i cleaned it, and tested the caps. No dice. Just going to send it to scrap.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
Hello there!
I was doing some usual stuff, browsing the internet, listening to music, coding, etc. and my computer froze. It looked like the website couldn't process the request (logging into the account, there was the loading symbol) and it took a few seconds, then my computer totally froze except for the mouse cursor. It lasted for about a minute and I got the BSOD. It happened yesterday and today (just now).
I managed to get the MEMORY.DMP content, but I don't really understand it. Could somebody help me?
...Code:************* Preparing the environment for Debugger
-
Hi all,
just wonder whether the Raspberry PI-TOP v3 schematic is available?
not the Raspberry PI itself, but this little add-on board:
thanks,
-jp...05-11-2024, 02:58 PM -
Greetings, community. I have a few Raspberry Pi 3B+ devices that for the most part won't have a 3V3 power line, but in some cases also have missing components or shorts to ground. Would be really helpful to have a board view file for those as a reference. Thanks a lot in advance!...
-
Hi, i have an hp probook 440 g8 with a bios password, i did my search and find a tool to erase the password (here : https://www.badcaps.net/forum/showth...probook+440+g8) But i don't know how to read or flash the bios. I also don't have an eeprom programmer but i have a raspberry pi 4b and some arduino. If really it's not possible what eeprom programmer is compatible ? thanks for your help! Normally there is a pictures of the EC rom chip i need to flash...08-03-2023, 05:00 AM -
Hi, I have an HP EliteDesk 705 G1 mini.
Model: HP EliteDesk 705 G1 Desktop Mini
Processor: AMD PRO A8-7600B
Motherboard PCB Marking: "APCB M3 94V-0" / "NPGC N-150TL"
BIOS Chip: Winbond 25PE20VG (2 Mbit SPI, 3.3V, 8-pin SOIC) and MX25L6473E 64Mbit (8MB), SPI NOR, 3.3V, 8-pin SOIC
Could someone help me with my bios , request:
unlock MPM/DMI with a BIOS patch/mod , dc tay42069 if someone could help me pls
Im gonna leave down below my working bios, if someone could mod it so it has the mpm...
Comment