Hi good morning, I needed the scheme motherboard model Apple Mac mini G4 model, PowerPC, to know the power connector pins. You know something? thank you very much
-
-
Re: MacMini G4 PowerMac ver 2005...
This is the connector MacMini G4 and want to adapt it to connect SATA hard disks ... I should do? thank you very much -
Re: MacMini G4 PowerMac ver 2005...
adapters are cheap, but fitting it in the case may be tricky.
maybe going SSD would be simpler.
http://www.ebay.co.uk/itm/221674948000
or using a compact-flash adapter.Comment
-
Re: MacMini G4 PowerMac ver 2005...
And this adapter would be better for the upper connector ? greetings
Comment
-
Re: MacMini G4 PowerMac ver 2005...
if that is a sata dvd interface then no,
but if it's an IDE/ATAPI interface on the adapter then yes - it would work.
one other thing to keep in mind.
the apple may not boot a harddrive on the second interface - it depends on the bios.
are you looking to fit 2 sata drives?
because if you are - keep in mind you will be generating extra heat.Comment
-
Note to mods: please remove the first thread i posted. It had crappy title. Hopefully this will make some powermac expert look at it more likely
So i bought PowerMac G5, which worked for around an hour. Then i decided to partially strip it down and re-paste CPU, after which it still worked. However just after i added DDR2 memory into it and connected it to 220v, the mac made a loud pop noise, diagnostic leds on the front side of motherboard shortly blinked and since then, the power mac has no signs of life at all
PSU is API4fS13. There is no visibly broken component... -
Does anyone knows how to use an Apple Potassium J137 ALDA568568 to see iBoot messages of a MacMini 2018?
I was told its to be used with Apple ktools ... where can I get it?...04-22-2025, 04:14 PM -
looking for scheme robusta 6050a3128301 a01
Dynabook l50-g 11j04-02-2025, 03:51 PM -
Have a nice day!
My boss bought a shipment of laptops. There was a MacMini in the box. It is MDM locked, can I somehow make it usable? I didn't steal it, I have the receipt for it!
SN: C07FC06SPJJ9
PN: BCGA1992 -
Just picked up an iMac powerpc for $1 at auction. changed pram. This is working. Problem, barely any sound. I have everything cranked up in software, reset nvram/pram - nada. I do get sound ONLY if I plug in a powered speakers in headphone port. I do not get the startup bong.
I get almost no sound with normal headphones. I mean, you can barely hear it. Took the board out and by eye found these 2 inductors broken. Not sure if they are for sound. Speaker is also plugged in and I tried a normal pc speaker in its place - still zilch. Are these inductors the culprit?
I cannot find any schematics...
Comment