Macbook Pro A2141 pp2v5 rail

Mrtrigo89

New Member

Join Date: Sep 2025

Posts: 1

Country: United Kingdom
#1

Macbook Pro A2141 pp2v5 rail

Today, 07:00 PM

Hi all,
i got an A2141 with no power issue. Has 20v 0.08a on usb c meter.
12.6v on PPBUS_G3H ,2.5V on PP2v5_NAND_SSD1 but 5V on PP2v5_NAND_SSD0.
Can enter to dfu but getting error.
what should I check next?
Thank you.
Tags: None

Previous template Next

Macbook Pro 16" A2141 screen artefacts, kernel panic

by sofles

Hi there.

I have Macbook Pro 16" 2019, model number A2141, motherboard number 820-01700. I have some problem with dedicated graphic card. When Macbook switches to dedicated GPU it is getting instantly hot and starts to show glitches on screen, then it freezes (trackpad is not clicking anymore) and shuts down.
I tried to reinstall MacOS But it was a pain, it started to show glitches in middle of installation and I could not finish it. I only was able to reinstall MacOS when I put Macbook outside (it is winter and -2 Celcius).

Now situation looks like this, If...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
02-05-2025, 05:05 AM
Lowest possible resistance on laptop motherboard rail - Guide Table request

by Nagy Daniel

Hi, I'm Daniel, and I'm new to the world of repairing motherboards.

I would like to create a table, or more likely a guideline about the voltage rails and their possible resistance rail.

I know that the motherboard design has a very big depend on the rail's resistance, but I would like to know what is the smallest value for a rail that can be acceptable. For example, I heard that some new gaming motherboards can have 0,5 Ohm resistance on the GPU rail, but on an older type, it could be a sign of a shorted GPU rail.

So, I generated a table with AI so I can...
- Channel: General Electronics Technical Discussion
03-04-2025, 08:24 AM
MACBOOK PRO A2141 SSD SHORT

by Arshad alam4659

I HAVE A MACBOOK PRO A2141 820-01700 THIS BOARD IS PP2V5_NAND_SSD1 SHORT TO GROUND THEN I CHECK ONE SIDE U8600 IS SHORT THIS SIDE IS ONLY ONE CHIP U8600 OTHER SIDE
PP2V5_NAND_SSD1 IS OK AND U9100 U9200 U9300 U9400 IS ALSO OK Will removing the U8600 fix the board or will I have to install a new one

Link to boardview --> https://www.badcaps.net/forum/troubl...91#post1449091
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
10-01-2024, 08:26 AM
MacBook Pro A2141 replaced battery not booting from battery not charging. Works with power suppy

by Schluchti45

Hello,

i ask if someone has a hint for me. I have a A2141. The original battery died and i replaced it with a new one form Ifixit. After the replacement the MacBook Boots only with the power supply.
Coconut Battery is recognize the battery but it is not charging. When i remove the power supply the MacBook is immediately dead.
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
11-18-2024, 02:05 AM
Macbook pro A2141 graphics short

by Arshad alam4659

Macbook pro a2141 PP1V8_S0_GPU is short to ground , how can i disable gpu, someone tell me
- Channel: Schematic Requests ONLY!
09-23-2025, 06:59 AM
Loading...
No more items.

Macbook Pro A2141 pp2v5 rail

Macbook Pro A2141 pp2v5 rail

Related Topics