Looking for Apple II Gurus- Appleworks Help

Maxxarcade

Badcaps Veteran

Join Date: Jul 2006

Posts: 973
#1

Looking for Apple II Gurus- Appleworks Help

11-23-2012, 04:41 PM

I have an Appleworks data disk from high school that I really want to load on my old Apple IIc.

I can load the program and put my data disk in, and it lists my data file, but when I try to load it, the drive starts running then stops, and the system seemingly locks up with the message "getting this file" still on the screen.

Is it possible that the IIc is not quite compatible? The file and disks were originally used on a IIe, and it's Appleworks 2.0.

Last edited by Maxxarcade; 11-23-2012, 04:46 PM.
Tags: None
severach

Badcaps Legend

Join Date: Aug 2007

Posts: 1055

Country: USA
#2

12-02-2012, 09:10 PM

Re: Looking for Apple II Gurus- Appleworks Help

When I read in all my Atari 800 5.25" floppies I had to leave the top off the drive. Every few disks I had to clean the heads.

sig files are for morons
Comment

Previous template Next

Apple Watch Charging Controller Schematics / Boardview - 820-02601

by a_p3rson

Hi there,

I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.

You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...
- Channel: Schematic Requests ONLY!
04-21-2025, 11:41 PM
Apple A1370 after flash shows no disk

by ktmmotocross

Hello.
Have this Apple A1370 that have bad bios. i have trouble with my programmer RT809F and must use A341CH with Asprogrammer. Now laptop start but not see my hard drive.
I dont work much with apple, is there something that must be done to run os on disk? or i should search for why disc is not recognized. Dump for flash was confirmed working from here...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
01-26-2024, 02:17 AM
Apple Macbook A1707 Hard disk

by Eleways

Hi

I've an Apple macbook A1707 with Hdd defect.

This product don't work with a normal Hard disk, but the hard disk it's a BGA component on the logic board.

My question is:
Can i exchange the hard disk, by desolder the bga Hard disk and replacing this?

Can i replace with a different one (es 500 gb instead of 250 gb)

This Macbook has T1 security check.

Thanks and best regards

Luca
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
02-18-2022, 04:23 AM
ASUS ROG STRIX B550-I GAMING - M.2_2 port not working correctly with SAMSUNG SSD980 1TB NVME SSD

by DynaxSC
Hi,

I have an really very weired issue with ASUS ROG STRIX B550-I GAMING.

Some NVME (PCIe) SSD's are not working correctly in the second M.2 socket. An example of it is the SAMSUNG SSD980 1TB NVME SSD.
Some other NVME (I have only smaller ones) disk do work without any problem, also SAMSUNG disks, eg an MZVPV128HDGM-0000.

The behaviour is also really very strange, i.e.:
- The disk shows always up in BIOS - so it is recognized, so far so good
- POST-ing with this disk with fresh Windows 24H2 installation (done in the M.2_1 socket) in the M.2_2 socket
...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
02-23-2025, 01:33 PM
Testing ATX PSUs under load - Does loading the ATX 24 pin also load EPS & PCIE?

by AJ847.63e

Hi Folks,

Just wanted to clear up a misunderstanding of mine (or what I expect is one). Isn't the 12V rail from the 24 pin, EPS and PCIE separated? IE if I put a power resistor on the ATX 12V pin that is not going to load, thus tell me if the EPS or PCIE rails are fine?

I was recently watching ArIs from Hardware Busters video on how to properly test ATX PSUs without using 5 figure Croma substations.

The PCB adapter he used breaks out the 12, 5 and 3.3V pins from the 24 pin and gives you banana plugs to connect to. That is a bit useless is it not? Aren't...

https://www.youtube.com
- Channel: Troubleshooting Power Supplies and Power Supply Design
05-06-2025, 10:37 PM
Loading...
No more items.

Looking for Apple II Gurus- Appleworks Help

Looking for Apple II Gurus- Appleworks Help

Comment

Related Topics