Can this section include PCs in custom-made housing, such as in a boombox?
-
My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics. -
Re: Custom housing
Yes. Remember the briefcase PC thread? That's custom PC housing.I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro
-
Is a mid-2000’s boombox worthless? - I’d say probably yes or at least certainly a candidate for this thread:
https://www.badcaps.net/forum/showth...post+worthless
Long story long , my dad picked up a Sony CFD-E55 boombox over a decade ago from the trash room in a condo where we used to live.
(Note: picture below is of the boombox after the repair.)
He then put it in a box when we moved places and it sat in the garage for a few years. Eventually, I tested the boombox and found that it worked on batteries, but not on... -
Hey All, I have loads off hps all with passwords and custom splash screens is there anyway to remove the splash from bios dump well am doing the passwords on them or anyway to remove the custom splash atall...
-
I already posted this on vogons.
Its a 3d printed custom bracket for socket 478.
I used this AM4 bracket as a base design.
Its to be use with cheap generic clip based cpu cooler.
Reason for doing this is:
- Its hard to get/find a good copper base cooler. Even if you find one, the price is ....
- New generic cooler is cheaper and can use bigger fan (less noise)
I tested the bracket with cheap chinese horizontal cooler + fan taken from CM hyper 212 evo.
The processor that I was using is P4 2.4Ghz prescott.... -
1. Download latest bios update for your laptop model. (xxxxxxxx.exe)
2. Double click on .exe and choose "Install" and NOT "Update". It will unpack .exe in C: \Drivers\Flash\xxxxxxxx
3. Go to folder and launch winuptp.exe with cmd.
4. A window will appear announcing that there is a custom logo installed and if you want to keep it or not. Click "No". It will restore factory default image....07-31-2023, 01:15 PM -
Hi, I'm stuck in removing custom logo from T590 and replace it with original one. I did try to remove it with bios update but no joy. Also i did try with LMU but there is no option for replacing logo. Any ideas are welcome, thank you!
Comment