These look real?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 370forlife
    Large Marge
    • Aug 2008
    • 3112
    • United States

    #1

    These look real?

    http://cgi.ebay.com/10-Nichicon-200v...3286.m20.l1116

    Look like fakes or real?
  • KeriJane
    Mac Enthusiast
    • Sep 2008
    • 681
    • USA

    #2
    Re: These look real?

    Hello

    I'd say probably.

    I've bought caps from JEA before and those seemed legit.
    Also, they have a 100% feedback rating. That would be hard to keep if they were selling fakes.

    Have Fun,
    Keri
    The More You Learn The Less You Know!

    Comment

    • Toasty
      Badcaps Legend
      • Jul 2007
      • 4171

      #3
      Re: These look real?

      Look real to me. Probably NOS. I don't think it would be worth the time to fake a slow mover like that. 3300uF@6.3v perhaps, but not 680uF@200v.

      The GQ series has been superseded by the GU series.

      https://cdn.badcaps-static.com/pdfs/...72cb968a1c.pdf

      http://products.nichicon.co.jp/en/pr.../alum_list.cfm

      Toast
      veritas odium parit

      Comment

      Related Topics

      Collapse

      • cnti
        Samsung 245B PLUS - BN44-00195A - bang and smoke - solved - tips
        by cnti
        Hi.
        BacCaps forum is awesome - thank YOU ALL for sharing knowledge!

        This is about DONG YANG PSU BN44-00195A failiure in Samsung 245BPLUS. It started with bang and smoke from the back of LCD. Downloaded diagram BM44-00192A - a bit different but I will use all parts names from this diagram [and real PSU].
        BIG CAP CP801 had 315V, on standby pin 5,2V. After shorting S_B ON (through 3,3k ohm resistor) 24V and 5,3V were missing, on CP801 was 312V.

        RM801 [real PSU: RM801 - 0,22 ohm 1W] - FAIL
        burned, measured 10M ohm.

        QM801 [real PSU:...
        10-19-2023, 05:33 PM
      • edugimeno
        Diagnose real-vintage Strong-Hammer arcade machine
        by edugimeno
        Hi there!
        My friend wants me to help him repair his old-real-vintage strong-hammer machine. Well it's only 90% real as the force applied doesn't lift the weight itself but it is measured and it moves a motor that lifts the weight

        I am attaching several pictures of the machine.
        It basically has 2 sides, left side has
        • 2 x 220->12+24v transformers
        • 2 relays (1 moves motor UP, other moves motor DOWN)
        • IGF and breakers for safety
        Right side is shown on pictures. It has 3 boards ( top-down)
        • Logic board. Receives 24AC and recitifies it into DC. Contains a uC (M80C85)
        ...
        02-29-2024, 11:05 AM
      • DynaxSC
        MSI PRO B660M-G DDR4 - real bios dump from board needed (no stock bios)
        by DynaxSC
        Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).

        I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...
        11-17-2023, 10:56 AM
      • DynaxSC
        Need real mobo dump of BIOS v402 for ASUS PRIME Z590-A - stock image no help
        by DynaxSC
        Hi,

        I have a serious problem to program the Z590 chipset SRAM with a Management Engine after replacing the chipset.
        The new chipset is factory new and is not containing any Management Engine. Any attempts to program it into the chipset under Windows ends with a failure (eg. Error 20: Management Engine Device not present, or something similar).
        Due to the lack of the ME several ports on the board, including all M.2 ports aren't working, booting OS works only on USB. So it's now other way, as to program the chipset with a ME.

        Usually on ASUS boards it worked...
        06-14-2024, 03:49 PM
      • bohaboha
        REAL OR FAKE SOLDERING PASTE
        by bohaboha
        Hello everyone today I see this advertisement about a soldering paste that is according to them video posted as almost fantastic for all surface soldering to the point that one becomes suspicious
        Therefore, your experience is of great importance. Is it really as good as it looks or ?​...
        03-04-2024, 09:53 PM
      • Loading...
      • No more items.
      Working...