Nichicon HE okay?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jonnycat
    New Member
    • Jan 2005
    • 3
    #1

    Nichicon HE okay?

    Howdy,

    I bought some of these from digikey last month for recapping an MSI 6330. I am wondering now if they will be suitable for the job.

    Thanks for any insight,

    Jon

    PS here is the datasheet for them:
    Tags: None
    • RoadKill
      Member
      • Jun 2004
      • 49
      #2
      You're probably long gone now but I believe it's only the HM(M) series that trouble. At least that's what I recall.

        Comment

        • MD Willington
          Badcaps Veteran
          • Sep 2004
          • 702
          #3
          They've probably purged the stock of the affected lots.
          Ya'll think us folk from the country's real funny-like, dontcha?

          The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • DrewPhillips
              Capacitor Diarrhea - Nichicon PL Series
              by DrewPhillips
              Hello All, I have on the bench a couple of PSU's which have some failed Nichicon PL series caps. They didn't "puke" their guts through the top, but instead "diarrhea'ed" corrosive brown electrolyte through the bottom, down the legs and onto the board. On one cap, the electrolyte rotted the cap right off the board leaving 2 little stubs, and also corroded a trace on the foil side.

              The PSU's are Power-One MAP series and are ringing-choke topology. The semiconductors have date codes in 1993. The PSU's were used in a commercial application, fan-cooled. They had failed...
              03-02-2025, 10:18 PM
            • nick3092
              Mid/late 80's Nichicon Yellow Caps
              by nick3092
              I recently acquired a set of Bose Roomate speakers from the mid to late 80's. Basically the right speaker cabinet is completely passive, and the left one has the power transformer and amplifier circuit in it. Out of curiosity, I opened it up to see what the circuit looked like. Looks like they used all Nichicon VX (2x 4700uF/16v for smoothing off the bridge rectifier), a couple random Nichicon SE series sprinkled on the board, and what really caught my eye - 2 yellow sleeved Nichicon caps (both 1uF/50v with no real series marking. Below are pictures of the caps. The only thing not shown in these...
              08-28-2022, 03:56 PM
            • chth96
              Is there datasheet for nichicon LXJ series?
              by chth96
              I want to calculate capacitor ESR referring to below guide.

              https://forum.digikey.com/t/calculat...-from-tan/2633


              I must find out dissipation factor(Tan(δ)) for nichicon lxj series(6.3v 1500uf,25v 1000uf ,10v 2200uf)
              I finally found out datasheet which has all series of nichicon capacitor.But unfortunately, It removed old nichicon capacitor.
              Is there anyone who still has old nichicon datasheet which has information of LXJ series?
              11-20-2022, 08:11 AM
            • chth96
              Is there any datasheet for nichicon RT(M) series?
              by chth96
              A few days ago,I destroyed one of my japanese retro game console by pluging it to 220v outlet.
              https://www.badcaps.net/forum/troubl...e-been-blew-up

              and I finally fixed​ this retro game console by soldering varistor and glass fuse.

              But I noticed that When I measure voltage of PSU's 5pin connector, it is 8.80-9.07v, 5.13v,3.40-3.48v,GND,GND instead of its rated voltage of 9v 5v 3v GND GND.
              I have spare console...
              11-28-2023, 03:36 AM
            • spiros.p
              EV dsp,replace the nippons lxz with nichicon fw ?
              by spiros.p
              Hi guys.I have two EV dsp processors and before two years i do full recap to both. The units have before recup thousands hours running.On output input coupling caps (16 pieces) i solder nippon lxz series 100mf 63v (this time i don't have other stock) i know is low esr caps.Last week have found and order nichicon fw standard audio series.Is a good reason to replace the nippons lxz with nichicon fw ? The units get better sound? Or get worse?Thanks for any advice.
              12-19-2023, 12:26 AM
            • Loading...
            • No more items.
            Working...