Hi all, My dell monitor SP2208WFP was having intermittent issues where after being turned on, it would show the image then turn into a black screen 2 seconds later with the power light being the same. I could unplug all cords but power and it would do the same. Switching imputs would reset the 2 second timer, but then it would go back again always after 2 seconds.
I google'd and it brought me to this very helpful website. I learned about a lot of useful things already. I opened up my monitor and found that (3) Capxon 330 p746 kf 105c capacitors were bulging on top on the board with the main power. This is my first time ever opening one up. They appear to be 9.6m by 17.8mm, so i assume they are 10mm/16mm. Upon looking at a chart found here, I found these Panasonic FM 330uF 35v 105c 10/16mm's. I noticed capxon was on the bad caps list, and panasonic is on the good caps list. I found 4 of them for $5.
I just wanted to ask and see if these would work, and also is that probably the problem? I've never done any of this stuff before but i'm a huge DIY guy and willing to learn just about anything. Have pictures if necessary. Thanks
I google'd and it brought me to this very helpful website. I learned about a lot of useful things already. I opened up my monitor and found that (3) Capxon 330 p746 kf 105c capacitors were bulging on top on the board with the main power. This is my first time ever opening one up. They appear to be 9.6m by 17.8mm, so i assume they are 10mm/16mm. Upon looking at a chart found here, I found these Panasonic FM 330uF 35v 105c 10/16mm's. I noticed capxon was on the bad caps list, and panasonic is on the good caps list. I found 4 of them for $5.
I just wanted to ask and see if these would work, and also is that probably the problem? I've never done any of this stuff before but i'm a huge DIY guy and willing to learn just about anything. Have pictures if necessary. Thanks
Comment