I need help. I have to replace the capacitors of my PCB My book (Western Digital).
I identified a UHM0J102MPD3 with a low impedance. The Nichicon no longer producing this capacitor (HM series), and is only paying the shipping costs and import too high. I could not find anything with the same characteristics respecting the low impedance:
ORIGINAL
UHM0J102MPD3
1000 uf v 6.3
Impedance (Ω) MAX.20˚C / 100kHz = 0.030
Rated ripple (mArms) 105C / 100kHz = 1140
8x11,5
POSSIBLE REPLACEMENT??
PANASONIC - EEUFR0J102
1000 uf v 6.3
Impedance (Ω) MAX.20˚C / 100kHz = 0.056
Rated ripple (mArms) 105C / 100 kHz = 950
8x11,5
Impedance (Ω) MAX.20˚C / 100kHz = 0.041
Rated ripple (mArms) 105C / 100kHz = 1240
8x15
With a bit of effort I could to put the 15 mm, but do you think I could have problems for the highest impedance?
thanks and sorry for my bad English
Marco
I identified a UHM0J102MPD3 with a low impedance. The Nichicon no longer producing this capacitor (HM series), and is only paying the shipping costs and import too high. I could not find anything with the same characteristics respecting the low impedance:
ORIGINAL
UHM0J102MPD3
1000 uf v 6.3
Impedance (Ω) MAX.20˚C / 100kHz = 0.030
Rated ripple (mArms) 105C / 100kHz = 1140
8x11,5
POSSIBLE REPLACEMENT??
PANASONIC - EEUFR0J102
1000 uf v 6.3
Impedance (Ω) MAX.20˚C / 100kHz = 0.056
Rated ripple (mArms) 105C / 100 kHz = 950
8x11,5
Impedance (Ω) MAX.20˚C / 100kHz = 0.041
Rated ripple (mArms) 105C / 100kHz = 1240
8x15
With a bit of effort I could to put the 15 mm, but do you think I could have problems for the highest impedance?
thanks and sorry for my bad English
Marco
Comment