Is what I have compatible with this power supply?

[Justin_D33]

Hello all. This is my Delta DPS-250AB PSU. It does not work anymore, and I'm assuming the cause is dried-out secondary capacitors. Specifically, those dreaded CapXons. I have some recap stock I salvaged from a dead ECS 945GCT-M3:
1, United Chemicon KZG 560 µF 6.3V, there's one of these
2, Sanyo WG 2200 µF 10V, there's 3 of these that came from the VRM area
3, more Sanyo WGs, these came from the PCIe area. There's 3 in total, they are 6.3V ones. I forgot the exact capacitance, and I don't want to dig them out right now.

[stj]

slow down.
is the 5v standby dead?
if it is then you need to check the fuse and any small caps on the primary side.

[Justin_D33]

The fuse is good, last time I checked it looked fine, but 5VSB could very well be dead. I don't know, because this PSU hasn't been powered in almost a year and I can't check. Next time I get a chance, I will.