Capacitor replacemens in OZ

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pete5
    New Member
    • Sep 2006
    • 2
    #1

    Capacitor replacemens in OZ

    Hi all
    I have a few Questions just in case some one could help me

    Does any one know if there is any suppliers of motherboard Caps in Australia?

    I was thinking of getting some caps off an old Mobo but is that a bad idea?
    just incase i can not find new parts

    I have two different boards that have bad caps

    HP e-Victra
    6 x 1000uf 25v 10mm x 25mm
    1 x 1000uf 6.3v 8mm x 12mm

    Soltek SL-85DRV4-C
    1 x 1000uf 10v 10mm x 12mm
    6 x 1000uf 6.3v 8mm x 12mm

    Thanks in advance
    Pete
    Tags: None
    • gonzo0815
      Badcaps Legend
      • Feb 2006
      • 1600
      #2
      Re: Capacitor replacemens in OZ

      The Soltek is probably equiped with GSC, Teapo or G-Luxon. None of them is a good choice for recapping, as they usually are the bugger wich are replaced during recapping.
      The HP i duno, either some Nichicon or badcaps too.
      I would suggest to PM BigPope, a member of this forum. He can at least send you some Samxon caps, wich are probably good stuff (ATM no longtime test there, but the specs are promising) or look at waifong.hk.

        Comment

        • pete5
          New Member
          • Sep 2006
          • 2
          #3
          Re: Capacitor replacemens in OZ

          I Have managed to track down 1000uf 10v caps 10x12.5x5mm @ $0.41 In Westen Australia
          they are at if this helps other aussies and they doc ship world wide
          Worldwide Electronic Components
          http://members.iinet.net.au/~worcom/

            Comment

            • tazwegion
              Badcaps Veteran
              • Jun 2006
              • 444
              • Australia
              #4
              Re: Capacitor replacemens in OZ

              Farnells & RS Online also ship locally, as do Wiltronics Research (Hitano dealers)... alternatively you could just purchase some Samxon components of Big Pope (of these forums)
              Viva LA Retro!

                Comment

                • cods69
                  Senior Member
                  • Oct 2005
                  • 92
                  #5
                  Re: Capacitor replacemens in OZ

                  http://www.rsaustralia.com/ nearly always have everything I need (Rubycon & Panasonic) at the Melbourne Trade Desk.
                  You mention WA - perhaps you are close to Perth?
                  RS Components, Perth, 26 Walters Drive, Osborne Park, WA 6017
                  Monday - Friday 8.00am - 5.30pm
                  Saturday 9.00am - 12.00pm

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Prolog
                      RTX 3080 FE Identifying capacitor
                      by Prolog
                      Hi people, I hope this is the correct spot to post this, I'm new to the forum.

                      I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

                      I hope these photos make it clear which component I am referring to:
                      (yes, the soldering is a bit botched from removing the blown one, I know)

                      I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
                      12-01-2024, 08:27 PM
                    • chth96
                      If I replace with inferior capacitor, Is it No harm to other IC components at all?
                      by chth96
                      I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
                      Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
                      It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
                      So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
                      I know that these capacitor will not last as long as nichicon capacitor...
                      12-22-2023, 04:34 AM
                    • chth96
                      How can I test non-polarized capacitor?
                      by chth96
                      I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
                      I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

                      And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
                      I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
                      06-02-2024, 07:31 PM
                    • chth96
                      Is it no harm to replace with capacitor without ripple current rating?
                      by chth96
                      When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.


                      Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
                      But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
                      Rubycon YK DataSheet (b...
                      04-19-2024, 05:19 AM
                    • chth96
                      Should I replace polymer capacitor?
                      by chth96
                      a few days ago I finally purchased mser-100 v2 and I tested its abillity of measuring ESR value.
                      I found that It shows pretty accurate ESR value for electrolytic capacitor,But When I measure polymer capacitor of dreamcast game console,I found that one third of polymer capacitor's ESR value is more than twice the value of ESR meter table.(for example, I measured one polymer capacitor of 6.3v 100uf, It showed ESR value of 7.68)
                      Although my dreamcast now turns 20 years old but it still works. I occasionally have played game with it.
                      Is this ESR value of polymer capacitor correct?...
                      11-18-2022, 04:22 AM
                    • Loading...
                    • No more items.
                    Working...