I have a insignia ns-39d400na14. I turn it on and there is only audio but no video. The back light comes on. If you push the menu,volume, and channel button nothing shows up on the screen. But it will change the channel and the volume will change. I guess at this point I'm not sure how to diagnose it any further. I attached a couple pictures if you need more let me know.
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
insignia has audio but no sound
Collapse
X
-
Re: insignia has audio but no sound
Is the t-con board part of the main board ? Maybe I should have taken some better picsLast edited by shadetreetrader11; 01-23-2016, 05:48 PM.
Comment
-
Re: insignia has audio but no sound
It is integrated T-CON to the panel, not replaceable. Do you see that very small green fuse F1 with 'O'? printed on top right next to the big black diode on the left of the connector? Check to see what DCV you have at both ends with ref to the chassis GND.
https://www.badcaps.net/forum/attach...7&d=1453610978Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
-
Re: insignia has audio but no sound
well... that thing is screwed. Only thing you could do now is to check the LVDS cable with the oscilloscope, while turning on and off the menu all the time. You should find the video signal and see if it changes. Then you know for sure the main board is good.
Comment
Comment