Hello All,
I looked though the other posts concerning this model but didn't see anything that had this logic board. So forgive me if I'm hijacking an old thread. I've just recapped the inverter/main board, the large one on its side is the only one that still is original. As it checked out alright. I used UCC KY & Panasonic FR caps. All but the small one and the large one were bulged/shot! But all I get now on the output is 13.34VDC. My guess is something is a miss on the logic board? If I understand correctly the logic board can cause start up issues even if the main board is putting out the correct voltage. Can anyone tell me where on the logic board to test? And what voltages should I see if its working correctly? Hopefully my uploaded pictures will help whomever chimes in to assist me.
Thanks As Always,
lcdman
I looked though the other posts concerning this model but didn't see anything that had this logic board. So forgive me if I'm hijacking an old thread. I've just recapped the inverter/main board, the large one on its side is the only one that still is original. As it checked out alright. I used UCC KY & Panasonic FR caps. All but the small one and the large one were bulged/shot! But all I get now on the output is 13.34VDC. My guess is something is a miss on the logic board? If I understand correctly the logic board can cause start up issues even if the main board is putting out the correct voltage. Can anyone tell me where on the logic board to test? And what voltages should I see if its working correctly? Hopefully my uploaded pictures will help whomever chimes in to assist me.
Thanks As Always,
lcdman
Comment