Hello, I have a Hp vs17e 17" LCD Monitor That Will not Turn On. I Pulled it apart and immediately found three caps that were oozing. I assumed that they were on the 5v Rail being 10v caps, plugged board in out of the case, and Pulled out my multimeter, turned out correct they measured 5.1v, however I got a surprise when I hit the power button the 5v rail drops to 0.75v. Anyway, I am almost sure that those caps are the only problem on the board, as I was able to get the power light to flicker dimly with only the board connected.
On to the Questions,
What Caps should I replace on the board? It's only a 17" monitor so I don't want to put too much money into it.
I think most of the caps in the list on this post are the same https://www.badcaps.net/forum/showthread.php?p=92533
As for the 3 Caps that are Leaking and two other that might be raised slightly what do you suggest for replacements?
2 Su'scon 1000uf 25v UK Series 105C Caps 13mm Round, Probably could go 15mm
3 CapXon 1000uf 10v KF Series 105C Caps 10mm Round I don't think it can go any bigger.
These Must be under 19mm High Might be able to fit a 20mm but it will be close to metal, Current Caps are both 16mm
Thanks!
On to the Questions,
What Caps should I replace on the board? It's only a 17" monitor so I don't want to put too much money into it.
I think most of the caps in the list on this post are the same https://www.badcaps.net/forum/showthread.php?p=92533
As for the 3 Caps that are Leaking and two other that might be raised slightly what do you suggest for replacements?
2 Su'scon 1000uf 25v UK Series 105C Caps 13mm Round, Probably could go 15mm
3 CapXon 1000uf 10v KF Series 105C Caps 10mm Round I don't think it can go any bigger.
These Must be under 19mm High Might be able to fit a 20mm but it will be close to metal, Current Caps are both 16mm
Thanks!
Comment