Selected images from our live and studio audio engineering activities.
-
I believe Chip 2 is BIN is the main one as it contained the Windows product key, marked with XXXXX for now.
SN: PF3G1REP
MODEL: 20KW-00J1AU
PROBLEM: Turns on blank screen, charging circuitry motherboard looks good. I have tried another firmware here - but resulted in 5V will not go to 20v due to different PD firmware I believe - using the current firmware it does go to 20V.
Requesting a firmware clean/BIOS region cleaned. Here is output from ME Analyzer:
╔═══════════════════════════════════════════╗... -
SK6281 Skymedi USB Disk Production Tool User Manual...10-18-2024, 03:14 AM
-
Recently I received a batch of HP desktops all of which are in testing mode bios.
They all display the error "Your system is not fully configured. Please contact HP customer support.
Warning: This BIOS is Not for Production Use".
It has a main bios and an EC separate on the board.
while trying to update the bios from the network it connects to the HP site downloads the bios with a version of 2.23 but restarts after downloading, same happens with a recovery pen drive. I tried programming it with a bios from another site didn't work.
Can someone provide... -
Hi guys,
I have acquired a HP Elitebook x360 1040 G5 laptop with the motherboard model BLURR-6050A2999101-MB-AX3(S3).
The laptop is actually engineering sample, as it displays this message on the boot screen: "Your system is not fully configured. pLease contact HP customer support.
Warning: This BIOS is Not for Production Use".
I had purchased a BIOS chip from ebay to replace the BIOS with the error message, but once installed in the motherboard in the WSON8 adapter, I think their technology "SureStart"... -
Been recently informed that NCC is EoL'ing many caps from ALL series, some series (like LE, long life, medium ESR/RC) will end as a whole.
From what I've seen, D5, D6.3 and D8 caps are affected. So ALL the small caps, either standard or low-ESR, and many caps in filtering (in D8, especially FSP, but many others use that in output filters in SMPS).
Last order accepted in 2024, so I will try to restock and pre-stock as many as possible to keep them caps flowing, but at the very last about 2030 I will most likely run out. Could only hope that other manufacturers won't...