Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Thanks fixed...
-
Lenovo Ideapad Flex 5 16" 82Y1. Power LED blinking constantly It seems BIOS broken or can't out from Deepsleep mode. Can you help me guys?
Model: Ideapad Flex 5 16IRU8
Motherboard: LC58-14IRU MB 223073-1 448.0RH25.0011
SN: PW061CYF
MTM: 82Y10003US...
Leave a comment:
-
HP Book 15, 15-fc1978au, DA0PDBMB8F0 REV:F same things happened. ALC3247 heating up when press power button after 1 sec laptop shutting down but ALC3247 still heating up and consuming energy. When i remove ALC still same and A21X 2898 seems like 16 leg Load Switch IC removing after PC not shutting down. But not trying to boot only Power led coming not trying to booting when i see usage from PSU. Can you help bro? Other components measure was seems ok. But i don't know where from start....
Leave a comment:
-
-
AN515-55(517-52) FH51M LA-J871P Rev:1B 2020-06-04 That was when lower iGPU usage laptop freezing randomly. Then i decided open Advanced options and setted iGPU clock to 1150mhz and OC config setted to adaptive it's now turned no display. Even CMOS not helped BIOS corruption or physical?...
Leave a comment:
-
-
Lenovo Thinkpad L13 Gen 2 - Serial Number: PW-01A0XZ, Type Number: 21AB-003LUS
Rails checked ok and Fan working CPU, RAM warming but no display. If do CMOS Caps Lock, F1, F4 light showing until turn off. Next boot try no lights. That EC and BIOS gone?...
Leave a comment:
-
Thanks. If i find service tag it can repairable? I don't have much experience about BIOS. My customer said he contacted reseller soon he will take Service tag....
Leave a comment:
-
Sorry how i find? Maybe laptop back is replaced only DP/N is available. On back don't have any stickers or writings. Inside of back DP/N: 096YX9 and CN-096YX9-5YC00-2A8-03J1-A01 writings there....
Leave a comment:
-
Dell Inspiron 3510 GDM50 LA-L246P.
When i click power button it shows amber light if i release button it's turning off. How long i click it's showing exactly. BIOS chip.s 1st leg is detached then i resoldered but nothing changed. Can you check my BIOS and EC are workable? This is my dump. I checked rails and components seems like nothing gone wrong....
Leave a comment:
-
2ohms is ok it's better check when running. If your CPU rails no voltages there is any damaged components will be foundable. This is told your BIOS and EC firmware working just need to find damaged component and do CMOS reset when you replace them. 1st check Charger EC then follow their usages....
Leave a comment:
-
Did you traced rails? I think EC Firmware can protect CPU power rails when components damaged. This symptom usually happens when CPU had no powers. Only flash bios can't fix this....
Leave a comment:
-
No activity results to display
Show More
Leave a comment: