Hello. Thanks for having me. Hope that I can find the schematic for a motherboard here, I think that someone will be able to help me!
Regards
Panagiotis
I'm new to the community but well-versed in electronics. I really enjoy the art of electronics. I have a lot of non-professional technical experience, and I enjoy collaborating with others who, like me, may need help. You can always count on my help, as long as you have the knowledge.
Best regards to everyone.
I'm new to the community but well-versed in electronics. I really enjoy the art of electronics. I have a lot of non-professional technical experience, and I enjoy collaborating with others who, like me, may need help. You can always count on my help, as long as you have the knowledge.
Best regards to everyone.
Loved electronics when I was a boy. Built my first computer, a ZX81, from a kit, then computers took over. Have been getting back into electronics repair, as a hobby.
I grew up between New Jersey and Maryland, and ever since I was a kid I’ve been hooked on electronics. I still remember the first time I took apart our family computer just to see how it worked and the thrill of putting it back together again. That curiosity has stuck with me ever since.
Over the years, I turned that curiosity into skills. I became a certified computer technician and an IPC Specialist, and now I’m pushing myself further by working on my CompTIA Security+ certification. I’ve had some fun stops along the way too, including working at Shore Printed Circuits in New Jersey, where I sharpened my PCB soldering skills, and more recently, building Centaur robots at Teledyne FLIR for military applications.
Outside of work, I love staying hands-on. I started out fixing smartphones for friends and family, and that grew into modding PS5 controllers with back buttons and other tweaks to make gaming more fun. That mix of hobby and career eventually inspired me to launch my own repair business, where I keep learning every day while helping others.
I’m excited to be here, swap knowledge, and connect with people who are just as passionate about electronics and repair as I am. Looking forward to sharing what I know and picking up new skills from all of you!
Hi i'm from Chile... and trying to fix my lenovo Legion BIOS from not activating secure boot..... has been a LONG journey.... so if i can fix it.... iw ill post it ....
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment