Hello everyone!
I am from Ukraine.
Since childhood, I was interested in how smart people repair electronics. I always wanted to learn how to do it myself.
But I had to go to work in another field (my parents sent me to where there was work).
In life, I have always tried to repair everything myself. As the saying goes: "If you want to do something well, do it yourself!"
But I lack knowledge.
Now I am trying to fill all this.
I came here for knowledge.
I am ready to help, if it is in my power, others!
All the best!
After a failed BIOS update on my Lenovo IdeaPad Flex 5 14ALC7, I'm looking for the latest BIOS .bin file to recover the system. Any help would be appreciated.
Hello all. I am new here. I joined the forum to get informations and others about laptops. hopefully I will have knowledge to gain, and knowledge to share later. Thnx.
I am a repair guy with 30 years of experience and all ways searching for info. Here is a lot of it so thank you for letting me in. I hope i can help also with my knowledge.
Joining to see if i can get help reading and writing to chips with a CH341A since all of my knowledge is just networking, software and very little coding
Hola a todos, Soy Igragon, he estado por muchos foros buscando información sobre todo este tema de BIOS y placas madre y en todos los sitios mencionan esta pagina y a todos vosotros, sois los mejores y sé que ayudais a mucha gente a solucionar problemas, espero poder aprender mucho con vuestra ayuda y os agradezco de antemano a todos y cada uno de vosotros si podeis ayudarme cuando tenga problemas, gracias a todos y saludos!!
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment