Hi I'm a ham radio from Italy, I studied electronics at school and I like to save old electronics from the tip.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi everyone, I'm a hardware technician & glad to be here with you people! For now I'm working on Surface devices most of the time, but I work on other brands too. Your community looks very profound & I hope to be one f the good members of it. Thanks for helping peopleComment
-
-
-
-
-
Hello,
My name is Norman Henriquez and I'm a home recording studio owner, working with predominantly analogue gear.
As such I have taught myself to service my audio equipment and and always interested in acquiring knowledge about electronics.
I just learned about this site, when watching a video where I was trying to learn about diodes, as I need to replace one on a VFD display that I'm attempting to repair.
As I often find myself spending, sometimes, months trying to figure out some electronics stuff all on my own, I'm hopeful that I'll be welcome to ask my questions here and get some help.
I thank all very much, in advance.Comment
-
-
-
-
-
-
Hi,
my name is Alexandros and i like to repair electronics as a hobby.
Grew up in Greece in the 90' and loved taking apart electronics since i could hold a screwdriver and that love only got bigger after managing to repair an old radio my father had in the garage.
My interest tiltet towards computers after my father bought his first PC in 1997. Started repairing computers as a side gig when i was 12 years old and started taking on phones as well 4 years later.
Today i live in Norway and work as an IT Consultant with my main tasks being the development, management and implementation of system integrations as well as the management and training of the company's trainees.
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment