hii i'm new and excited to learn stuff
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
My name is simon.
I love fixing electronics and want to try out as many different products as possible.
I've recently been having trouble with my dell xps 7590 laptop not charging, so I'm looking into it. I came here to see if you could help me with some technical assistance.Comment
-
-
Hello world!
I came here looking for assistance troubleshooting an audio receiver that's refusing to cooperate and do it's damn job! Although chances are I'll probably stick around even after this project, because the truth is it won't be long before I'm elbow deep in the next project and it will be nice having someplace where I know I can seek help, instead of just panicking and eventually abandoning the project. 😂😂😂 Oh yeah, I also have really bad ADHD. Sometimes it means I ramble waaayyyy more than I should, or even intend to. So this is me apologizing ahead of time for those times when I go off the rails and post a full page long essay when a simple sentence or 2 would suffice....😅 Yeah....Well, c-ya round the forum, folks!! 👍🏽-BZZZZT *POP* "Dammit!"Comment
-
Hello everyone,
My name is Murat, and I'm from Turkey. I'm a laptop repair technician with a strong focus on hardware troubleshooting. I have been working in electronics and repairs for many years, and recently, I have been improving my skills in BGA rework and component-level motherboard repairs.
I've been using this forum for a long time, but I just realized that I never introduced myself in the new members section. It seems like a great place with a lot of knowledgeable people, so I'm happy to be here. Looking forward to learning and sharing experiences with you all!
Comment
-
Hello my name is Gabriel, I'm from Brazil, and I'm here to look for a solution for my Microsoft SP5Comment
-
Hey everyone!
My name is Kim, I am Swedish, but currently reside in Finland.
I joined Badcaps.net a while back but never got into introducing myself so I wanted to introduce myself. I've been interested in electronics repair for a while, especially troubleshooting and fixing various kinds of hardware related to my work. industry as a site engineer with focus on maintenance and keeping everything smoothly running. I've done some basic component replacements and board-level repairs, but I'm always looking to improve my skills and learn from more experienced users. I work in the crypto mining
I came across this forum while researching for a repair project and was really impressed by the knowledge and helpfulness of the community. I hope I one day can also contribute to the community!
Comment
-
Hi! I'm Sol
I'm just trying to save my notebook
i don't know nothing about electronic, but i'm searching info for the person who's trying to save my computer.
i don't know what more can I say here
Comment
-
Hello !!
I´m from Portugal , and i signed up to this forum to learn a little about everything.
Thank you for accepting meComment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment