Josh, student looking to find out more about the ROG ally pinout
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Hello everyone, first of all I would like to thank the creators of the forum for their excellent work. The forum is really helpful and has saved many pieces of equipment. I am an electronics hobbyist and in my free time I repair whatever I canThanks to everyone for their commitment and help. By repairing equipment we make the world a better place. Best regards.
Comment
-
Hello everyone!
I accidentally came across this forum while searching for a solution to my problem online. After browsing through it, I realized that I should register here. I really like the friendliness of the members and their willingness to help others.
A little about myself:
I have been repairing mobile phones, tablets, etc. (mainly Apple) and occasionally laptops for over 22 years. I am self-taught, so sometimes I need advice from someone more experienced, especially in the field of laptop repair. I will be happy if I can also help someone with my own experience.
Comment
-
Olá, eu sou o Leandro vivo em Angola (África), trabalho como técnico de informático e sou grato por me terem aceite neste fórum, espero poder trocar experiência no que toca bios, esquemas eletrônicos e boardeview e muito mais.
ObrigandoComment
-
-
-
hola, actualmente me estoy comenzando a meter al tema de reparar tarjetas madre de laptop, espero poder ayudar a alguien por aqui y tambien que me ayuden, saludosComment
-
Hey everyone ! I'm Gwen from France, i'm an old Apple technician and on my extra time i repair every type of laptop and pc, so i might need your help or i can also help you in any waysee you soon
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment