Halo nama saya Rizki ,saya inggin berkonsultasi mengenai masalah BIOS di laptop saya.mohon untuk membantu saya dalam hal ini.terima kasih
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
-
Comment
-
I'm a IT Technician, I live in Tuparendi - Rio Grande do Sul (BRAZIL), I'm 30 years old and I have a IT store where I do some minor maintenance on desktop computers, notebooks and also Smartphones...
1. I found Badcaps on Google when searching for bios file.
2. Mainly, I would like to improve in terms of motherboard repair.​Comment
-
​Hello, my name is Miguel Paredes, I am starting out in electronics, I work in a company that is dedicated to repairing laptops and I like to read the forum looking for errors that are similar or the same as my problems that I encounter every day. I would like to be able to expand. my knowledge and one day I will be able to contribute to this beautiful communityComment
-
Hi, I'm Daniel from Spain. I've been working as electronic engineer since 2013. I've repaired a couple of laptops recently (because some friends thinks you can repair everything). I'm trying to look for some motherboard information and I've decided register to get access to this forum.
Nice to meet you.Comment
-
Hello. I am EE student. Mostly chose the major for fun and interested learning more about hardware hacking. I don't see EE as a degree for a job, I see it like an art.
I often dumpster dive and take home A LOT of good computers still working. I like to tinker with electronics and working with them.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment