Hi, i'm learning electronics at home and i'm really curious and want to learn more about the electronics world. So that's why i'm here !
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
I've been low to mid-level IT contract worker, performing a lot of IBM~Lenovo and Dell warranty repairs, at 'work',
and many out of warranty repairs at my home lab.
Now that I've supposedly reached retirement years, I'm now upgrading
and updating my home shop, so that I can pursue tech repairs independently.Comment
-
Comment
-
hello! I come from Russia, I repair household appliances \audio equipment\computer peripherals\ office equipment, now I want to learn how to work with motherboards, repair laptops\mini PCs \ video cards.
I am a software technician by education, I have 5 years of experience in this field, I have repaired a lot of things, I will have to deal with a lot, I will be glad of your help colleagues!Comment
-
Hi There!
stumbled over Badcaps and happy to be here.
I am a Child of the 80es, growed up with B&W Tv, used (old) Radios and were happy to spend my first earned Money into a Walkman and LPs
C64 and Amiga were my personal Drugs, also Electronics and tinkering around.
Electronics is still a Hobby, KiCad my new Friend.
CheersComment
-
-
Hi to all. I'm Rolly
I'm an electronic engineer and I join this forum in order to stay close to people who have the same interest with me in order to keep improving my skills.
I'm a new one I I think that I will be welcome.Comment
-
Hi folks,
i´m Dennis from germany.
my age: 45
i found this forum as i was searching for schematics an tips to repair a Macbook Pro A1425.
In my childhood i began to repair electronics an other stuff, so it is my hobby.
if i have questions i would ask, but the most is self explaining.
Comment
-
Hi! Very pleased to find this community on the web. I've just retired. With this new found freedom I am keen to pursue my own interest in my own workshop. One area I would like to dabble in is to learn and practice repairs on my electronics. I suspect most electronics stop working because of faults in the power supply etc. With help from the community, I hope to give these broken electronics a new lease of life!
Comment
-
Hello everybody!
I'm writing from Italy (sorry for my poor English), I'm a mechanical engineer and I like to repair things... sometimes I need to repair old computer and, in this case, I need to find a bios for my old samsung np300 notebook.
Thank you for your precious support!
^_^Comment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment