Just a chill guy trying to get rich
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
hello i have bios issue after updating... i have a P8B75-M/CSM and after a update to bios it shows no display or functionality.I have a chip flasher (Ch341a) and need to know where my bios chips are so i can flash them! I did all steps on ez flash 2 and still got this error. If you know where the P8B75-M/CSM bios chips are, or how to fix this issue please email me : marcuscool55@gmail.comComment
-
Hello, name is Eric. Owner of a computer shop for about 24 years now. Or rather it owns me if I'm being honest.
Old enough to have a 5 digit STEAM ID and played with 3 digit players. Yup, was a beta tester for Counter Strike
I'm a break fix junkie.
Play around with all kinds of stuff, build, repair, networking, cameras, phones, etc... Component level repair on laptops. Just started playing in the world of BIOs, and this looked like the place to be !
Thanks !Comment
-
Hello everyone,
My name is Braulio, and I am a Systems Analyst. I am currently here at the forum to explore new ideas, share experiences, and continue learning. With a background in analyzing and improving software systems, I work on optimizing processes, designing solutions, and supporting teams in making informed decisions based on data and technology.
I am excited to connect with other professionals in the field, gain insights, and stay updated with the latest trends and advancements in technology.
Looking forward to engaging with all of you!
Thank you!
​Comment
-
I'm new to computer maintenance, I discovered this forum and hope to gain a lot of knowledge here.
Greetings to all​Comment
-
-
-
-
Greetings badcaps gurus, I usually go by the username ravenox. But unfortunately that username was already taken so here I am as RavenTheOx.
So to follow in suit with some of the first posts I saw in this thread I'll let you know that my first machine was a 486 running dos 3.1.1 and I crashed coursed my programming skills in qbasic.
Thank you all for letting a noob like me hang with the cool kids
*Tips grey hat*
Comment
-
Hello from Poland!
Electronics is my hobby. Except extending life of my own my family electronics I'm often playing a bit with some IoT and similar electronics.
Professionally I'm Cybersecurity expert, with past experience in computer networking, network design and some operational experience with IBM Mainframes.Comment
-
Hi everyone,
I'm a software engineer student and have started a degree in electronic during covid (bad idea), but i it made me love electronic, low level coding and hardware. Trying to enhance my skills in here.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment