Hi, I'm Noah. I joined because I wanted to give some help and tips about web development and other Tech stuff.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hye.. I love to repair thing such as fan, home supply, phone and pc and everything.. But the thing is i really dont have electronic background.. All just try and error.. Found someone mention in reddit about this site to look for help and schematic.. Maybe this will help me to complete my dream..Comment
-
Hello,
My first name is Jirka, but when you are talking to me, in Czechia it's common to say:
"Hi Jirko, etc...". My age is near 60.
I begun with computers in early 80s on intel i8080A. In the 1st employment I worked on the "kind of" IBM370's copy EC1021 with 64kB ferrite memory and 7.25 MB disks.
Then writing programs in assembler, Pascal and C for Z80A on CP/M machines, next on PC and recently for mocrocontrollers - Microchip PIC, Atmel ATMega ATTiny etc.
I'm happy to be at this site and hope to find plenty of interesting and usefull things here. Thank you.Comment
-
Hi,
I go by Kotel Studios (as my name didn't suggest it) or by just Kotel. I am a fan of retro hardware, especially computers. I still don't know how to fix stuffComment
-
-
Hi, I'm Ren, I'm a newbie in terms of electronics, but I am a full stack web developer/DevOps seeking more knowledge. Cheers to you all.Comment
-
Hello,
My name is Kijong Doh from Seoul Korea.
I'm here to find help to repair a audio systems.
I have seen an last year posted video about the same Stanmore issue.on this forum.
Maybe other users can give me a informations.
Thank you for join with BADCAPS. Comment
-
Hello,
My name is Kijong Doh from Seoul Korea.
I worked for electronic company for 30 year.
After retire, i interest in repair electronic devices.
And I'm here to find help to repair a audio systems.
I have seen an last year posted video about the same Stanmore issue.on this forum.
Maybe other users can give me a informations.
Thank you for join with BADCAPS.Comment
-
Comment
-
-
Here's a polished introduction for you:
Hello, my name is Daniel, and I have 14 years of experience as a skilled technician. Over the years, I've honed my expertise in diagnosing and repairing various devices, specializing in both hardware and software solutions. I take pride in delivering reliable and efficient results, ensuring that every client gets the best service possible. My hands-on experience and commitment to problem-solving have built my reputation for excellence in the field.
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment