Hello everyone I am donny I live in the US and a part time re seller on ebay and other sites. I do not know much about computers but I'm hoping this forum can help me out. Thank you
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
Hello,
I'm just a small town PC repair person who develops software. I've made my own firmware for the Lenovo ThinkPad X131e Chromebook, with the help of Mr Chromebox, and I try to push technology to their limits in order to help improve technology in the future.
You can call me Garry or "BunnyPad", it doesn't matter.
Thanks to all the people on this forum for their great work.Comment
-
Olá, sou o LegalPP_Gamer e sou técnico em informática desde 1999, sou gamer por diversão e auto didata em electrónica, Brasileiro e moro no estado de São Paulo, gostaria de ajudar e ser ajudado promovendo o conhecimento de qualidade e aprendendo.Comment
-
I like taking old computers and giving them new life.
I'm getting into Linux... Love it!
I'll probably spend the rest of my life trying to figure this all out...
Today's mission unlock BIOS Supervisor password Lenovo M920q and Harden and run Ubuntu server 22.04 LTSComment
-
Hello everyone!
My name is Elie Mghaizel. I'm from Lebanon, and I'm a beginner in laptop hardware and BIOS repair. I'm very happy to be a part of this community. I'm here to learn more about troubleshooting hardware issues and working with BIOS configurations. Looking forward to gaining insights from experienced members and sharing my progress along the way. Thank you for having me!
Comment
-
Hello I am nefaaI live in the Tunisia (north africa) I do not know much about computers but I'm hoping this forum can help me out. Thank youComment
-
Comment
-
Comment
-
Hi all! It's been a joy to glance through these introductions. I'm a relative newbie in the world of electronics repair but have had some success with smartphone/laptop/vintage audio repairs so far. Always happy to learn more, and now I'm off to solder some RAM chips XDComment
-
Hello,
I’m a retired software engineer and chronic tinkerer. I started my formal education in Electrical Engineering and really liked the software/computing aspect of the curriculum so I ended up getting my degree in software engineering and have been in that industry for 35 years. I also enjoy building micro-controller (Raspberry Pi & Arduino) based IOT systems which has allowed me to bridge my software development knowledge with basic electronics interfaces. I hope to use the forum to expand my knowledge of electronics and help fill the gaps in my knowledge of electronics and electronics repair.
thanks,
DhuddlesComment
-
G'day from way downunder aka New Zealand...
I'm 54yrs old and still leaning stuff..
Cheers
RodComment
-
Hello everyone. Just wanted to say hello. I have some basic knowledge in electronics however I would like to develop my knowledge. I’m thinking that joining this forum will help me do this and be able to ask questions about anything I’m working on or need help on.Comment
-
Name Tahwer Mohibullah
Birthday 11 DEC 1989.
Im an Architect and building designer by profession, and have experience of over 14 years now, however i have multiple hobbies, such as Gardening, electronic repairing, automation, IT and research on new technologies.
I spent most of my time learning about electronic stuff, practice soldering and fixing stuff, specifically computers and laptops. so far i repaired 4 dead motherboards and 3 laptops on my own by researching online and watching youtube videos,
i also document my hobbies and experiment by making youtube videos, i have a channel namely Nature fuzz,
i found badcaps forum while i was searching motherboard schematics to diagnose and repair my b450 motherboard, it has been good experience here at badcaps, i often read discussions on this forum which enlighten me alot.
i thank all the contributors of this forum who make DIY repair easier and helping to reduce electronic waste.Comment
-
Hi, I'm Lucky, and I'm currently learning to become a tech professional. I'm working hard to build my skills in areas like com. tech and programmer, like coding, networking, hardware, etc. I'm excited about the endless possibilities in the tech world and motivated to keep learning and growing in this field.
Comment
-
Hiya,
I'm sxmus (pronounced samus like the metroid character). I'm an amateur hardware and networking enthusiast, and slowly dipping my toe into more advanced device repairs as I get a little more skill
Currently in the process of trying to fix a T480S I bought online.
Big props to all the work everyone is doing on here, it's nice to see a good forum run by people who are genuinely helpful
sxmusComment
-
Hola, me gusta la tecnología y espero aportar y/o encontrar aportes de personas con más experiencia en el campo.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment