My name is Mark, I’ve been a hobbyist in the electronics repair field for 20 years. I’m needing some resources for tv repair info.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
Good morning, everyone,
I joined this forum for help. I was suggested by a colleague who told me that I would find experts and enthusiasts here. I consider myself a beginner but with a desire to learn. I will soon be posting a request for help for a television that I am fixing, but that is another matter. Thanks for accepting me!Comment
-
Hello, I come from Turkey, you immediately noticed that your site is a very helpful forum, I would like to prevent the help of the draw and be useful to other friends.
Comment
-
Hello everyone! I am a student in computer maintenance and I aspire to become an expert in computer security... Your site helps me a lot with many computer subjects and I hope that my contribution in this area will help more than one person. Thanks for all!Comment
-
Hi all, just joined your forums. I'm a sw/hw technician working on Macs and PCs needing attention... Hope to find useful infos here and to be able to give some contribution too.
Comment
-
-
Hello, I'm an engineering student in France specializing in computer science. I've been passionate about tech since I was two.
I know my fair share of stuff computer wise but I never dabbled in the electronics field. So i'm here today to seek knowledge and be a better version of me by improving my skill.
I love to set foot in multiple domains so I'm pretty excited to learn new stuffComment
-
-
hai guyssss
so i am new to bios reprogramming
i recently bought a bios programmmer to help out a family member who has bios issues with their laptop
i came here to find out some more on the topicComment
-
First time to use this forum.
Is there anyone out there that works on televisions. I fix them as a hobby. A sticky problem I am running into often now is a vibrating, jittery, screen. Currently have a Samsung that looks great for two seconds, then jitters around for a second, and then back to good again. I've checked and cleaned contacts. Checked voltages and they seem to be constant. Any advice. Also have a Vizio that does something similar.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment