hello all
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Hello, my name is Dan, or Fluffytech99, i'm from Kyiv , Ukraine.
I'm a beginner in electronic repair, and always willing to learn more, so i decided to jump into boards repairs, bios mods, and etc.
im here to learn more and share my experience.
Thanks you for Reading!
T99Comment
-
Thanks for the acceptance ive been in the games console mod scene for about 20 years now jeez im old just trying to learn about bios editing/flashing ended up here hopeing I can give back as much as I learnComment
-
-
-
-
Hello,
This is my first post.
I discovered this forum because I need to cleanup some passwords on my laptops since my kids decided to put some passwords and can't remember them !!
I live in Europe and have some IT knowledge but not the good expertise in electronics.
I hope I will be able to find good help here.
And as some wise guy use to say, be excellent to each other, and party on, dudes !!!Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment