Hi! I´m electronic enthusiast from Finland. I got really enthusiastic to learn smd and bga repair and laptop repairing seems interesting way to start
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi Badcaps, Techie from London. This looks like a good hangout and resource for sysadmins and such like so I'm glad to join :-)Comment
-
Hello my name is Fabrizio I do electronic repairs in Buenos Aires, im looking forward to expand my knowledge, thanks for sharingComment
-
So I am a hobbyist and trying to learn the most I can, Doing micro soldering, Have done a few mac repairs and always wanting to learn more and troubleshoot board level, No need to throw that newer macbook out with a 5v draw problem, lets see if we can fix it and not landfill itComment
-
-
Hi
I'm Mark. I like fishing old digital crap out of skips and rescuing long dead tech. I'm a sucker for pain and puzzles
Keeps my brain cells active.
Comment
-
Hi,
I'm a beginner hobbyist in repairing graphics cards. The idea is to spend my extra time doing something other than lounging on the couch, which isn't a bad hobby either
. I went to a vocational school for electronics installers when I was young, so it's probably time to put the time I wasted in school to use. So I'm a 55-year-old hobbyist from Finland and there aren't any polar bears on the streets here
. Electronics has always fascinated and challenged me in many areas. Here's my brief introduction. Thank you for letting me join this forum.
Comment
-
Hi all!
I'm new here, my name is Massimo, 50 yrs, from Italy, i'm a software developer in finance world. Sometime i spend a couple of hours learning about how computers work...
I'd like to give a little contribute but i'haven' paypal nor crypto wallet, there's other manner to doit? (credit cards?)
Comment
-
Hello Good day ! I'm Khalid Caril from Zamboanga Sibugay Province, Philippines
Thank you very much for accepted me here in great forumComment
-
Hi everyone,
I'm Zak and I'm Irish.
I like trying to fix things that are well beyond my experience or current skill level and often end up making them worse.
I'm hoping the wisdom of others will benefit me in future endeavours.
Cheers!Comment
-
Hey guys🖖
I've had the opportunity to learn several skills through my life, from 3d printing to body shop. I'm fan of learning; the crazy projects and tech reading are my drugs.
The last 7 years have been pretty much about computers and stuff. It was 2023, when the electronics started to call me, with a good grade of success as far.
After reading some of the introductions, I know I got to the right place.
Ready to learn, contribute and have a lot of fun.
Great to be here,
-Daylight-Comment
-
-
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment