Hello!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
-
-
Hello all,
I call my self (and is called by others) Screemer on the net.
I work with IT and I totally love computers and technology.
At the present I am trying to get a Dell latitude 5420 8FC8 to run after giving it a really bad bios flash.
I "think" I managed to fail on read of the original bios, modded it to remove Admin password and reflashed and now it's totally dead.
Other than that I am 54 years old, work to much, love to play computergames like Lord Of The Rings Online, old DOOM, old QUAKE, original Wolfenstein and so on.
I am a bit dyslectic so you will see spelling and wording failures.
If you wan't to know something, feel free to send me a PM.Comment
-
-
Hi ,hope I'm doing this right,Had to google Sticky topic in case it was naughty,
Worked on computers when they had ferrite cores .Wrote my own bootloader for the vic20.
Like to repair quality stuff.My own panasonic plasma is now staring to play up ,hope I can get help and be helpfull here,Comment
-
-
Comment
-
Hello. I'm 54 years old Croatian guy from Dubrovnik that had moved to Venice, Italy 6 years ago following my love. I had my computer service/shop for 20 years and I sold it when I moved from Dubrovnik. I'm computer freak and my first computer was Commodore 128 (with 1571).Comment
-
-
Hi! im Santiago, been fixing phones and stuff for about 10 years, and i want to gain an even deeper knowledge of repairs, and start soldering and doing board repairs. thnks for having me here!Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment