Hello my name is Virgil I am here mostly out of desperation lol. I live in Bakersfield Ca. I an 59 years old and retired. Electronics have been a hobby and i dp pretty good on fixing everyone in my families broken things. When i was working i worked in the printimg imdustry with weekly magazines.We a a family thought it would be good if we all bought the same laptops. So we bought 8 MSI Gf65 thin 10ue, well after a year I have 5 dead laptops. We figured out the common link and it was that the 5 people would use the laptop on their bed and we figure the fans got obstructed by blankets. It's only a theory though. So needless to say I am searching eveywere for a schematic of a MS-16W21 motherboard. Any help would be deeply appreciated. Thank you
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Hi guys, I'm just learning to build a server in Ubuntu and I am stuck on this DELL bios that requires an administrator password for an optiplex micro 3080 it's nuts. I'll be using this forum a lot in my coming journey into web deisgn and electronic record keeping through a private web server.Comment
-
Hello All,
I just came across this forum and found it to be excellent for finding help for DIY repairs, recently I have a GPU (zotac GTX1660ti 6GB) which failed and I am trying to diagnose the issue and hopefully keep it from getting trashed, In general I like to repair stuffs on my own so hoping as a part of this forum will help me out greatly on my DIY repair journey, Thanks.Comment
-
-
Hello y'all, it's a great pleasure to have discovered this site. It has rescued me on several occasions. I might be forgiven for taking this long to introduce myself, the group is better and healthier when members chat and share resources.
My area of interest is technology in electronics and electrical. I like troubleshooting to component level, very satisfying whenever a dead circuit board comes back to life. ðŸ¤
I'm self taught in electronics though I have taught many who are undertaking degrees and diploma in electronic-feels good when imparting knowledge.
My desire is to be a pro in BIOS and other firmware manipulation.
That's it folks!Comment
-
Hello my is Devon, I do not work in the technical field but I am learning a lot about PC's. I am trying to operate a non-profit inline skate club and want to create an app or website for creating and maintaining memberships and dues. I own a bunch of different variety of skates and I want to own a bunch of different tablets and connect them all through the business domain. I'm here to learn as much as I can and to hopefully be prepared for any obstacles that comes my way. A few organizations and people have donated me some laptops and computers and I am noticing one of them has a domain it belongs to. Communications with that business is a headache, they have no idea how to help me so removing that computer from thier domain is an issue. The IT department fights me back when I was getting into power scripting via powershell and I'm new to this. So again thank you for the welcome and I look forward to learning more from this community and hopefully I can put out anything for someone else to learn from me thanks you guys.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment