Hello all; I'm excited to find this group geniuses. I work on board repairs and am always looking for new schematics, boardviews and ideas. Thanks for allowing me to join this great community
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
Hi everyone!
I'm happy to have found such a treasure trove of knowledge here.
I'm mostly a software developer with a few decades of experience, but I recently got into electronics projects & repair and I'm happy to save things from being thrown to the dump. I'm still pretty amateur, but eager to learn.
Also shout out and a big thanks to Richard from Learn Electronics Repair, who also is a regular member here and from whom I learned about this forum and quite a lot about electronics and how to repair them.Comment
-
-
Hello!
I am guy who does not work with electronics professionally but have a long term interest. I used to tinker a lot, take things apart and desolder/collect components etc,. But then "real life" and "work" took over. I love fixing and building things in general, not only electronic things but lately it has been refocused on electronics more.
I have a good understanding in general, what components do etc. and lately my interest for repairing modern electronics (laptops, phones, tablets) has increased. I hope to learn and to contribute to this fantastic forum.Comment
-
-
I've been immersed in the world of phones and computers since the debut of the first iPhone. My name is Boja, and I've been tinkering with these devices, mastering their intricacies, ever since.Comment
-
As a hobbyist, I'm thrilled to embark on a journey of discovery into the fascinating worlds of electronics and computers. These fields have always piqued my curiosity, and I'm eager to dive in and explore the intricacies that lie beneath the surface.Comment
-
hello just introducing my self came on here to fix my liquid damaged MacBook pro 166 2021 A2485Comment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment