hello all, i am a diy enthousiast. Iam very happy to join the community !!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi every. body
My forum name is strjjens. I am an Electronic engineer.
I'm new to this forum so pls guide me if i'm not walking on the right path, guideline for the forum.
My laptop has stop working and in my quest to seek information for repair I ended up in this forum.
For now, looking fwd to gain feed back, to help me repairing my laptop, and turning it from a brig to a laptop again
Have a nice day
Br
strjjensComment
-
Hello,
My name is Satouri from tunisia, Usually, I was afraid of disassembly or trying to repair electronics , even though I work in buying and selling used electronics, but this time, I hope it will be an entry point for an begginer like me to acquire some skills.Comment
-
Hello I'm an enthusiastic (very much amateur) with too much time on my hands who thoroughly enjoys the satisfaction of repairing something.Comment
-
A2338, after sometimes trackpad and keyboard not work, and USB keyboard and mouse work all time,
changed UT360, UT301. Diode value dropped in PP1V85_S2_IPD from 443 to 200. then i will replace that both IC and again value increase. same repeat. any idea, what to do,Comment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment