Hi im here to fix my MSI GL75! looking for schematics to repair. thanks!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hello my friends, my name is Elija, I'm german and 58 years old.
I started learning computing to make my time more useful.
Now I'm studying motherboards and how BIOS and CMOS works on it. I'm pretty sure I'm gonna learn a lot in here.
Danke!Comment
-
Hi guys, just decided to join your lovely forums. I found this place when I was searching for capacitors for replacing the bad GSCs that are on a board that a buddy from work gave me.
Hope to have some fun here as well as learn more about computer electronics and sharpen my electronics skills.Comment
-
Hello, George Giedrius frim UK. Started looking here when trying to repair a3540 . Power supply issues, lifted traces, bad caps, now looking to simply replace the power supply, but they are almost as scarce as hen's teeth. Will keep searching here as I try to repair other's flat panels.Comment
-
Hello everyone!
My name is Peter and I started working on some electronics a few years ago,and now I have several stuff to work on,and I want to deepen my kowledge on this site.
Im interested in laptops,and networking devices,and pc hardware repair as well,sometimes phones and tablets can jump on my table so those stuff is accepted in some cases.
Best Regards!
Comment
-
-
Hello everyone I had Sega mega drive 2 consoles, the original and a clone, I successfully repaired the clone before buying the Sega dreamcast in 2003, and already in 2004 I built my first PC - Intel pentium 2800 with an LCD monitor))) I repaired the PC motherboard for the first time in 2006, in 2009 the first cell phone, Here as in India. Sometimes I repair something that costs like a hamburger))) And sometimes something that costs like a normal car!Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment