Announcement

Collapse
No announcement yet.

New Members - please post your introductions here

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: New Members - please post your introductions here

    Hello all
    My name is Tim, and I am a broadcast engineer for a major group of stations. I discovered by trial and error just how easy it is to fix LCD monitors about 5 years ago when our large number of NEC and Samsung monitors, all about the same age, started dying. 100 % failure rate, amazing example of planned obsolescence. in 99% of cases it was the same few components that failed. I joined the forum for that 1% that are not easy to fix. If I can get it down to one monitor repaired every 15 minutes, it becomes economically feasible, otherwise to the recyclers they go... It's just that first example of a new model that takes the time.

    Comment


      Re: New Members - please post your introductions here

      Welcome to all our new members! This place keeps growing every day. Hope you all can find the answers you're looking for
      Ludicrous gibs!

      Comment


        Re: New Members - please post your introductions here

        I came accross this site as I was looking to fix a Onix Rocket ULW 10 Sub.
        I had encouraged my daughter and her husband to purchase the sub, as it was in the price range of what they were wanting to spend.
        A few years later and the sub has a constant humming.
        Searching the web , I came accross this site with the fix for the ULW 10. Much cheaper than buying a new plate amp from Parts Express.
        I am no electrionics wizard, so I will give them the information obtained here and hope they have a friend that can do the work.
        Just like to say thanks.
        Mike

        Comment


          Re: New Members - please post your introductions here

          Hello, I´m new. This site is a long expected wonder for me. Well done!

          Comment


            Re: New Members - please post your introductions here

            Hello! I came across this forum from a google search. I'm an EE but mostly a computer guy these days (last 18 years) and have contemplated fixing up some old dell fiasco motherboards that had the cheapo popped caps. Its so nice to find this forum and guys that specialize in this kind of thing!

            My main project is getting some of the small form factor dells with popped caps, replacing them and using them as diskless workstations (kinda like an x term).

            Thanks again guys!
            Chris

            Comment


              Re: New Members - please post your introductions here

              Hello all, I am a retired TV tech, I still try to keep up to date with the HD technology, still interisting to me. Neat site!
              Elmer

              Comment


                Re: New Members - please post your introductions here

                hi all
                found this site while googling about a psu board with bad caps
                glad i found it
                im a tv and computer engineer.
                cheers rob.

                Comment


                  Re: New Members - please post your introductions here

                  Hi all,

                  I just joined today and already posted a question about a Gateway LP2407 monitor. I enjoy working with computers and have done so for around 20 yrs. I also enjoy working on things and figuring out how things work. I was in the Army for 4 years back in the early 90's and gained some electronic repair experience. I don't have much experience at troubleshooting at the component level, i.e. resistor, capacitor, diode, etc. but I can easily replace such items if I know they are bad - often you can visually see bad components. If anyone has suggestions on how to learn more about troubleshooting electronics, etc. I would apprecitate any tips. This is a great forum with a lot of good information on it. I hope to be able to contribute with some of my experience as well as gain some more.

                  Russell

                  Comment


                    Good day to all

                    Hi all,

                    Just joined this forum, must say there are a lot of people here with a lot of knowledge about electronics and computers in general. I'm in the ICT sector and do a bit of electronics repair on the side line as a hobby. Well actually I've been doing repairs for about 25 years. I first stumbled across this website when I had problems with a computer psu that a friend of mine brought in for repair, and thanks to this forum I had the PC operational in no time. (Bad caps on PSU).

                    Anyways thanks very much for a superb website!!!!!!!

                    Comment


                      Re: Good day to all

                      ^ hey, welcome to the site! i agree there are many members here full of knowledge, really worth reading.-

                      you might as wel get a comment on not posting your intro in the intro's thread, -IMO- i kinda like individual introes but this aint my site, anyways, i hope you enjoy this place and get all the info you can and fix for your best interest all you want.

                      peace.
                      We don't have a great war in our generation, or a great depression, but we do, we have a great war of the spirit. We have a great revolution against the culture. The great depression is our lives. We have a spiritual depression.

                      Comment


                        Re: New Members - please post your introductions here

                        Welcome, Maddox323. I merged your thread in with this one
                        Ludicrous gibs!

                        Comment


                          Re: New Members - please post your introductions here

                          Hi,

                          I found this site when looking for info on a mic preamp with bulging caps.

                          I'm a engineer who leans more to the software side, but still enjoy hardware as a hobbyist.

                          Looks like lots of great info on this site and am looking forward to be a participant.

                          Jeff

                          Comment


                            Re: New Members - please post your introductions here

                            Just found this forum while Googling for info on a specific mother board in an older computer I'm repairing. First computer was a Sinclair kit. Wow, that that a pain in the rear to type on and then hope and pray you could save the program. Still have it too.

                            Did use main frames in the Air Force during Vietnam but never believed from that experience I'd ever want one at home!

                            Comment


                              Re: New Members - please post your introductions here

                              Greetings Gentlemen

                              Just found this site while trying to troubleshoot a minor problem with an LCD tv. Have experience in repairing electronics and currently work in sales and service of computers.

                              The site looked very interesting so I thought I would give it a try.

                              Comment


                                Re: New Members - please post your introductions here

                                welcome everybody!

                                Comment


                                  Re: New Members - please post your introductions here

                                  Hi,

                                  Name is Harvey (but that was taken as a user name)

                                  Have been actively associated with electronics since 1975 and have held technical jobs ranging from CE for Standard Register, Technical Manager for Showbiz (aka Chuck E. Cheese), Production Engineering Tech for Unitrol Sirens and many others over the years. My diverse background includes working as a machinist for a stint and even hanging and taping drywall professionally for 10 years. I founded my own research and development company in 1981 which bears the acronym used in my user name. No solicitation here, just a little background

                                  From little I have seen here so far, this looks like a great place to share information.

                                  Cheers!

                                  Comment


                                    Re: New Members - please post your introductions here

                                    Hi All,

                                    I've been looking around this forum for quite some time now, and always found useful info for my repair projects here. I'm not a trained technician or anything, just a inspired (yet careful) amateur that tries to save salvagable stuff from landing on the scrapheap. IMHO the best way to recycle stuff is in prolonging its lifespan.

                                    During the past years I've done some recapping already. Replaced the major caps on my Epox 8RDA+, which got it back on its feet until it bit the bucket again a few months later. The board has been laying in storage ever since. I did not succeed in reviving 2 Draytek 2200E routers, both failed due to a bad cap which caused the same resistor to burn beyond recognition. Ohm's value still unknown.
                                    At the moment I have my hands on a Samsung 940BW LCD monitor with a baaaadly failed PSU board. It has a large hole burnt in the PCB and numerous fried components, can't tell if it's caused by the cap that's directly next to it. Of course the 3A fuse that's in the circuitry directly before it is still completely intact... The board is beyond repair, so a total write-off. I'm thinking about opening a thread about this failure and attach some photo's, just to share the horror.

                                    BTW: as you can see from my nickname I'm sort of a 'born again Atarian' ;-) Started using my 800 again a few years ago, to find it still worked right away without a hitch after 20 years of storage. They just don't build 'em like that anymore.

                                    Regards,

                                    re-atari

                                    Comment


                                      Re: New Members - please post your introductions here

                                      Hello,
                                      I found this site when looking for help with my LCD ViewSonic.

                                      Comment


                                        Re: New Members - please post your introductions here

                                        Found this forum while looking for ways to save a lcd monitor. Looks like a great site for amateur (myself) to anyone on their way to expert. Look forward to repairing my monitor.

                                        Comment


                                          Re: New Members - please post your introductions here

                                          Hi guys!
                                          We need help in repairing monitor, Samsung SyncMaster N940
                                          Can not find the schema of this device.
                                          Preliminary testing has shown that faulty circuit inverter.
                                          It is suspected of malfunctioning Q201, Q202.
                                          We will be grateful to you for this information.

                                          Comment

                                          Working...
                                          X