Samsung 65q900 main board bn41-02679b

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Benass
    Senior Member
    • Oct 2020
    • 73
    • Uk

    #1

    Samsung 65q900 main board bn41-02679b

    Hello.
    Problem, power on then off in 3 sec or something like this.
    Standby light is on.

    From Power supply to main board 13v is present.
    Standby voltage. 3.3v 5v 1.8v.
    13v drops down to 12v after diode. then it disappears.
    Big aluminum plate at the back of the board prevents access to follow up 12v line.
    Lots of shorts near cpu area. CPU Inductors 7 ohms.
    CPU mosfets are CSD95378BQ5M
    PWM ic is TPS40428 VDD is dead short no 12v standby. Aluminum plate at the back prevents future checks.

    Any advice on how to figure out whats causing that 12v line short?

    Sorry if i brake any rules.
    Attached Files
    Last edited by Benass; 10-16-2022, 12:35 PM.
  • Benass
    Senior Member
    • Oct 2020
    • 73
    • Uk

    #2
    Re: Samsung 65q900 main board bn41-02679b

    Update.
    Above Left CPU inductor one cap was shorted.

    Restored 12v standby rail to healty 2k rezistance, but still dont have voltage.

    Comment

    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa

      #3
      Re: Samsung 65q900 main board bn41-02679b

      Freeze spray and voltage injection
      I assume no responsibility for any stupid suggestions I might post.

      Comment

      • Benass
        Senior Member
        • Oct 2020
        • 73
        • Uk

        #4
        Re: Samsung 65q900 main board bn41-02679b

        Thanks for your suggestions.
        I already did that, found shorted cap on 12v line for cpu mosfets.
        Resistance is restored on this line, but still no voltage.

        The good news: customer agreed to get replacement board. So when I get it, I will document the difference For future references. Also Bios dump can be performed if needed.

        Btw, this is a serious board. The similarities To pc or laptop board is striking.
        It has the one could guess, ram cpu gpu.
        Power rails similar to laptops. 5v 3.3v 1.8v 0.8v 1.1v etc... no wonder this TV cost 3k £

        Comment

        • dskall
          Badcaps Legend
          • Oct 2016
          • 2905
          • usa

          #5
          Re: Samsung 65q900 main board bn41-02679b

          I had to look again at title to make sure it was a tv mainboard.
          I assume no responsibility for any stupid suggestions I might post.

          Comment

          • Benass
            Senior Member
            • Oct 2020
            • 73
            • Uk

            #6
            Re: Samsung 65q900 main board bn41-02679b

            It is TV main board. But similarities to laptop main board is clear.


            I was wondering if there is a possibility of two separate 12v rails on the board.?
            or the rail itself have fuse halfway, and maybe the fuse is burned after capacitor shorted.

            Comment

            • Benass
              Senior Member
              • Oct 2020
              • 73
              • Uk

              #7
              Re: Samsung 65q900 main board bn41-02679b

              Update.
              The board is really complicated.
              Many rails low resistance. CPU rail 5-7 Ohms.

              Few other rails 20 Ohms etc......

              Board has few separate 12v rails. Ultimately, I was unable to fix this board.

              Got a replacement board. Now replacement board wasn't powering on at the beginning, but it booted up once all connections were plugged in.

              So I guess it checks for back light before powering on.

              Attached Files
              Last edited by Benass; 10-26-2022, 01:03 PM.

              Comment

              Related Topics

              Collapse

              • Dani_2024
                Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                by Dani_2024
                Hi and thanks in advance for any input you might provide!
                I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                10-28-2024, 05:06 PM
              • Lee M.
                Samsung UN75RU8000FXZA bad main board?
                by Lee M.
                When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
                11-08-2023, 07:46 PM
              • jb_Bak
                Sony xbr-65x900c main board issues?
                by jb_Bak
                Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                Power Board Connector that goes to Main board
                CN6401
                Pin 01 NC
                Pin 02 NC
                Pin 03 "BL_ON": 0V
                Pin 04 "N/C"
                Pin 05 "STBY 3.3V": 3.5V
                Pin 06 "GND": N/C
                Pin 07 "AC_OFF"...
                09-27-2021, 04:52 PM
              • JDC
                (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                by JDC
                ONN 100012588
                Issue: No Power, Then Rebooting After Main Board Change

                Short answer: replace main board and power board
                Technical answer: replace main board and Q306 & Q307 on power board.

                Long answer:

                TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                07-15-2022, 07:39 AM
              • m1ch43lzm
                HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                by m1ch43lzm
                Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                05-12-2025, 08:37 PM
              • Loading...
              • No more items.
              Working...