Dear all,
I have this board defective, don't have led active in stand-by.
Read IC1604 and see that from begining have only FF data, attached file. (W25Q40CL, vbc7.bin)
Erase ic and check if ic are blank, all ok.
Programming ic with a file that i received from lotas (file is UE49MU6400_SPI_ic1604) and now tv have stand-by led active and respond from remote but don''t have backlight active.
Could somebody to help me with the next steps...?
Attached also reading of IC1604 after power on when stand-by led are active but tv is not working,..., respond for remote access but don't start backlight.
Kind regards,
CM
I have this board defective, don't have led active in stand-by.
Read IC1604 and see that from begining have only FF data, attached file. (W25Q40CL, vbc7.bin)
Erase ic and check if ic are blank, all ok.
Programming ic with a file that i received from lotas (file is UE49MU6400_SPI_ic1604) and now tv have stand-by led active and respond from remote but don''t have backlight active.
Could somebody to help me with the next steps...?
Attached also reading of IC1604 after power on when stand-by led are active but tv is not working,..., respond for remote access but don't start backlight.
Kind regards,
CM
Comment