Panasonic TX-L42ET5E

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Skopsko
    New Member
    • Sep 2019
    • 3
    • Macedonia

    #1

    Panasonic TX-L42ET5E

    Hello to all.

    I need bin file for 25P40 ic9350.

    https://****************/dump/lcd_pd.../289-1-0-69830

    I cannot download from remont-aud, so if someone have the privilege to do that, I will appriciate it.

    The TV is blinking couple of times green diode code, after few seconds is blinking red for 10 times, so according to some forums, this file hopefully will resolve the problem.

    Thanks in advance.
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4744
    • Russia

    #2
    Re: Panasonic TX-L42ET5E

    Originally posted by Skopsko
    Hello to all.

    I need bin file for 25P40 ic9350.

    https://****************/dump/lcd_pd.../289-1-0-69830

    I cannot download from remont-aud, so if someone have the privilege to do that, I will appriciate it.

    The TV is blinking couple of times green diode code, after few seconds is blinking red for 10 times, so according to some forums, this file hopefully will resolve the problem.

    Thanks in advance.
    You are welcome!
    Attached Files

    Comment

    • Skopsko
      New Member
      • Sep 2019
      • 3
      • Macedonia

      #3
      Re: Panasonic TX-L42ET5E

      Thank you so much!

      Comment

      Related Topics

      Collapse

      • riparo
        Panasonic Oled 55EZ950E, no picture, red led blinking every 4 sec
        by riparo
        Hi everyone, I have a Panasonic OLED TV model 55EZ950E, as soon as I turn it on I don't have any image the LED goes from green to red LED blinking every 4 sec, I found the service manual suggests checking OLED PANEL, PB BOARD, T-CON connectors but it seems like everything ok, I didn't find any burns under the pb board
        I attach a link to download the service manual, thank you for anyone who can help me
        https://tel-spb.ru/download/?brand=P...0E_LA73.rar​
        01-11-2024, 12:35 PM
      • CoinCoin88
        Panasonic PF50G20S blinking 13 times
        by CoinCoin88
        Hello there,

        Google led me again to badcaps when trying to troubleshoot a dying Plasma that is sitting at my uncle's roughly 550 km from where I am. It's an old G20 from 2010 or so, that isn't being actively used so you can consider the panel "not too sollicitated".

        Symptoms: TV starts, works for 5-10 minutes, then screen turns black and safety kicks in and spits a 13-blink code with the red LED. Once this code kicks in, the TV will not display any image anymore. Unplug it for a few minutes, plug it again, it'll work then fail a few minutes later.
        ...
        06-30-2023, 05:43 AM
      • Andre Gilbert
        Panasonic TC-P55ST50 8 blinks then no blinks
        by Andre Gilbert
        Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
        Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

        TV Model: Panasonic TC-P55ST50
        ...
        11-20-2024, 08:52 PM
      • Tof
        Panasonic Oled TX-65FZ800E, no picture, red led blinking every 4 sec
        by Tof
        Hello everyone, here is the issue I am facing with my Panasonic Oled TX-65FZ800e.

        When the TV has not be used for some hours, I power up the TV with a video input and the image is displayed perfectly for 30seconds and then the TV switch off with the red light blinking every 4 seconds for ever.
        The service manual explanation: EVDD_SOS (EVDD 24V error) with check point (oled panel, P board, A board, T-CON)

        I opened it and found a burned connector on PB-board on the 24V pins.
        The 24V wires have change a bit of color due to the overheat and the corresponding...
        02-01-2022, 03:18 PM
      • itachi
        Panasonic TC-50AS630 No Image - Blinking LED
        by itachi
        Hello good people, I have another unit here which is giving me problems. Upon plugging the unit it, after a few seconds the front LED will start blinking 3 times in a row and repeating indefinitely. No image or sound.

        The first thing I checked was the backlight. It's a single vertical strip on one side of the panel which has 8 groups of 7 LEDs. (Part #V500D2-LS1-TREM3) I used a backlight tester and each group lit up without issue.

        The standby 5.3V is good, the 16V and 24V from the PSU board both come up for a few seconds while the TV_SUB_ON signal is high. Both 16V and...
        01-05-2021, 12:12 AM
      • Loading...
      • No more items.
      Working...