Sony KD-43XD8305 LED

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Akafuka
    New Member
    • Dec 2021
    • 4
    • Czech

    #1

    Sony KD-43XD8305 LED

    Hello everyone

    Yesterday two leds on bottom strip died.(tv works)
    Does anyone know what kind od leds this tv uses i asume edge led bit dont know voltage And brightnes i didnt diassembled it as i am using it every day.
    Or i should buy whole strip.
    Thanks fór the answers.
  • William1967
    Badcaps Veteran
    • Nov 2017
    • 203
    • Netherlands

    #2
    Re: Sony KD-43XD8305 LED

    It's better to change the complete strip(s), all leds have the same operating hours and might go dead in the near future.

    Comment

    • Akafuka
      New Member
      • Dec 2021
      • 4
      • Czech

      #3
      Re: Sony KD-43XD8305 LED

      Originally posted by William1967
      It's better to change the complete strip(s), all leds have the same operating hours and might go dead in the near future.
      Alright thanks i just wanted to spare some cash as i found just one seller who have the strip and its used as well

      Comment

      • dskall
        Badcaps Legend
        • Oct 2016
        • 2905
        • usa

        #4
        Re: Sony KD-43XD8305 LED

        Have you tried AliExpress?
        I assume no responsibility for any stupid suggestions I might post.

        Comment

        • Akafuka
          New Member
          • Dec 2021
          • 4
          • Czech

          #5
          Re: Sony KD-43XD8305 LED

          Originally posted by dskall
          Have you tried AliExpress?
          Hello well i already bought the used one in worst case scenario i am gona be resoldering LEDs everytime some dies

          Comment

          Related Topics

          Collapse

          • tmhobadcap
            TCL 65S403 Backlight LED Question
            by tmhobadcap
            I got the TV from a friend. He claims that no image but sound from the TV.
            I confirmed that when shine a flashlight on to the screen, I can see the image. And this should be backlight problem.
            I open up the TV and found a few leds failed. And now I am ordering a new set of backlight strips for it.

            But there is something that I do not understand when checking the leds. I do not have an led tester. I only use a bench power supply. I first set the voltage to 3V and current to 10mA. I could not light up the led until I increase the voltage to 12V. I understand most...
            05-25-2025, 11:03 AM
          • Pipolups
            Corsair K70 LUX RGB dying LEDs
            by Pipolups
            Hi there !

            I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
            Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...
            10-08-2024, 11:58 AM
          • edugimeno
            Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
            by edugimeno
            Hi There!
            I'm trying to help my friend who owns a restaurant be just bought.
            He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
            It's stuck using, I guess, the 2 sided tape that comes with the strip
            The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
            09-05-2024, 09:34 AM
          • Document Archive
            Sony VAIO SVF11N1L2E Hybrid (2-in-1) Fit multi-flip Specification for Upgrade or Repair
            by Document Archive
            This specification for the Sony VAIO SVF11N1L2E Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the SVF11N1L2E boardview and SVF11N1L2E schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
            09-06-2024, 05:27 AM
          • gkolio
            Sony Bravia 55w905a - 4 Red LEDs Blinking then Pink Tint
            by gkolio
            Hi have problem with 4 reds blink take lot help that forum and tell me change led strips and all going very good tv alive now but in down left have pink tint little and see only in white pages what wrong doing?
            12-01-2023, 09:09 PM
          • Loading...
          • No more items.
          Working...