any android wizards here ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4422
    • United Kingdom

    #1

    any android wizards here ?

    basically i have an android projector here that wont boot and the bootloader is locked . is there a way to unlock it for debugging from my pc ?
    the unit is an anker nebula mars 2 .. i have been on to the company and they lie to me saying they don't have a copy of the firmware and keep saying its a hardware issue . well it worked until doing a factory reset that bricked it .
    one thing that stuck out looking at recovery logs is the date and time .. its saying 1970 .
    Last edited by petehall347; 09-04-2021, 05:43 PM.
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4422
    • United Kingdom

    #2
    Re: any android wizards here ?

    well 62 views and no replies . maybe this is one of those impossible things i get lumbered with .

    Comment

    Related Topics

    Collapse

    • Grut
      JVC LT-39CA120 - Vestel 17MB171 - Android boot loop
      by Grut
      Hi everyone,

      My JVC (Vestel) LED TV is stuck on a Android boot loop when I switch the power on.

      Previously, I was trying to clean the storage memory (by deleting as many files as possible), I may have delete some start-up Android files.....so I screw it.🤡

      When I switch the power on, the initial JVC is shown. I have tried to run Android 9 from a bootable USB on the TV. It starts reading the USB but nothing happens and the JVC logo and Android boot loop keeps the same.

      Can anybody help me please finding the 17MB171 USB firmware to try to upload...
      11-15-2024, 03:12 AM
    • mon2
      Hisense 55Q9G Android reset / factory firmware reload
      by mon2
      Hello. Have a 55" Hisense TV that starts to load the Android OS (no backlight issues) -> reaches the app screen where you can view the assorted icons including Netflix and always crashes at the same point just after this launch. If I quickly press the cursor buttons, the cursor can navigate to the settings menu but will power off just after a few seconds of this activity. Do not believe it is power related since the crash is very accurate in the boot cycle.

      After the OS 'crashes', the power does go off and the from white LED goes dark for about 20 seconds and then ON again....
      01-03-2024, 10:25 AM
    • jchon
      How do modern TVs with Android/WebOS/Roku/etc boot? Debug ports?
      by jchon
      Hi I'm having issues trying to get my Sony A1E to power on.

      Which made me wonder, how involved is Android in the booting of the TV?

      I'm basing this information on what I can glean from the service manual:

      In my Sony A1E for example I see:
      BKA which houses the main processor and along with the input/outputs.
      DKA which possibly does up-conversion, in the block diagram I see VX1 coming in from the BKA and out to the TCON
      TCON timing board which drives the actual panel.

      On the BKA there's a sub-system called the U-COM...
      06-30-2023, 01:58 PM
    • sabriTech07
      Acer B3-A30 Firmware - RV02RC07 WW GEN1 (Android 6)
      by sabriTech07
      Hello,
      I'm looking for the official stock firmware for the Acer Iconia One 10 B3-A30 tablet with the following version:
      • Firmware version: RV02RC07
      • Region: WW GEN1 (WorldWide)
      • Chipset: MediaTek MT8163
      • Android version: 6.0

      I've searched various sites but couldn't find this exact version. If anyone has a working download link or can share the firmware, I'd really appreciate it.
      Thank you in advance!
      05-15-2025, 05:52 AM
    • ivtec
      Hep Connect Oukitel Rt 2 Android 11 to PC
      by ivtec
      Hi folks Can you guys help me to connect my Tablet Oukitel RT 2 android 11 to my PC Desktop Lenovo Thinkcentre M91, Win 10 ,i use USB cable it detects MTP USB device but not connect ,Check for drivers but it says the ones i'm using are updated for all USB ports. can connect my Samsung galaxy Android phone though.
      Is there an easy way to get it connected so i can transfer files safely without paying to much money?thanks
      07-21-2023, 09:14 AM
    • Loading...
    • No more items.
    Working...