any android wizards here ?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • petehall347
    Badcaps Legend
    • Jan 2015
    • 4427
    • United Kingdom
    #1

    any android wizards here ?

    basically i have an android projector here that wont boot and the bootloader is locked . is there a way to unlock it for debugging from my pc ?
    the unit is an anker nebula mars 2 .. i have been on to the company and they lie to me saying they don't have a copy of the firmware and keep saying its a hardware issue . well it worked until doing a factory reset that bricked it .
    one thing that stuck out looking at recovery logs is the date and time .. its saying 1970 .
    Last edited by petehall347; 09-04-2021, 05:43 PM.
    Tags: None
    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4427
      • United Kingdom
      #2
      Re: any android wizards here ?

      well 62 views and no replies . maybe this is one of those impossible things i get lumbered with .

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Grut
          JVC LT-39CA120 - Vestel 17MB171 - Android boot loop
          by Grut
          Hi everyone,

          My JVC (Vestel) LED TV is stuck on a Android boot loop when I switch the power on.

          Previously, I was trying to clean the storage memory (by deleting as many files as possible), I may have delete some start-up Android files.....so I screw it.🤡

          When I switch the power on, the initial JVC is shown. I have tried to run Android 9 from a bootable USB on the TV. It starts reading the USB but nothing happens and the JVC logo and Android boot loop keeps the same.

          Can anybody help me please finding the 17MB171 USB firmware to try to upload...
          11-15-2024, 03:12 AM
        • mon2
          Hisense 55Q9G Android reset / factory firmware reload
          by mon2
          Hello. Have a 55" Hisense TV that starts to load the Android OS (no backlight issues) -> reaches the app screen where you can view the assorted icons including Netflix and always crashes at the same point just after this launch. If I quickly press the cursor buttons, the cursor can navigate to the settings menu but will power off just after a few seconds of this activity. Do not believe it is power related since the crash is very accurate in the boot cycle.

          After the OS 'crashes', the power does go off and the from white LED goes dark for about 20 seconds and then ON again....
          01-03-2024, 10:25 AM
        • jchon
          How do modern TVs with Android/WebOS/Roku/etc boot? Debug ports?
          by jchon
          Hi I'm having issues trying to get my Sony A1E to power on.

          Which made me wonder, how involved is Android in the booting of the TV?

          I'm basing this information on what I can glean from the service manual:

          In my Sony A1E for example I see:
          BKA which houses the main processor and along with the input/outputs.
          DKA which possibly does up-conversion, in the block diagram I see VX1 coming in from the BKA and out to the TCON
          TCON timing board which drives the actual panel.

          On the BKA there's a sub-system called the U-COM...
          06-30-2023, 01:58 PM
        • zklgfs
          Anker SoundCore 2 Bluetooth Speaker Turns Off After a Few Seconds (Possibly Firmware Issue?)
          by zklgfs
          Hi,

          I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...
          08-11-2025, 02:14 PM
        • sabriTech07
          Acer B3-A30 Firmware - RV02RC07 WW GEN1 (Android 6)
          by sabriTech07
          Hello,
          I'm looking for the official stock firmware for the Acer Iconia One 10 B3-A30 tablet with the following version:
          • Firmware version: RV02RC07
          • Region: WW GEN1 (WorldWide)
          • Chipset: MediaTek MT8163
          • Android version: 6.0

          I've searched various sites but couldn't find this exact version. If anyone has a working download link or can share the firmware, I'd really appreciate it.
          Thank you in advance!
          ​
          05-15-2025, 05:52 AM
        • Loading...
        • No more items.
        Working...