mytv te32

[Zac]

hi all, I have a tv that remains fixed in stand-by, sw mp022-jd power supply would seem ok. i think about a firmware problem, the mather board is a cv306h-f. the eeprom memory 25q32fvsic.
I would need a firmware via usb, or a bios for eeprom. thanks to all greetings zac.

[lotas]

Re: mytv te32

Post your non-working firmware dump here, I'll try to fix it.

[Zac]

Re: mytv te32

thanks for the answer, the discharge from the eeprom? in what format?

[lotas]

Re: mytv te32

thanks for the answer, the discharge from the eeprom? In what format?

.bin

[lotas]

Re: mytv te32

Unsolder 25q32fvsic, read its contents (firmware) on the programmer, save and upload this file in BIN format.

[Zac]

Re: mytv te32

here I am ... hello LOTAS, sorry for the huge delay.

[lotas]

Re: mytv te32

here I am ... hello LOTAS, sorry for the huge delay.

Try it, don't be surprised that the dump size has become smaller.

[Zac]

Re: mytv te32

hello lotas ...it doesn't open with win.ra ... it tells me damaged archive

[SMDFlea]

Re: mytv te32

hello lotas ...it doesn't open with win.ra ... it tells me damaged archive

Update winrar or use 7-zip

[lotas]

Re: mytv te32

hello lotas ...it doesn't open with win.ra ... it tells me damaged archive

Update WinRar

[Zac]

Re: mytv te32

eeprom file working at the first try .. perfect thanks lotas .. the tv had corrupted file, probable forced shutdowns ... question if the same defect occurs again, can I put the .bin file you restored on usb and boot directly from the tv?

[Zac]

Re: mytv te32

question if the same defect occurs again, can I put the .bin file you restored on usb and boot directly from the tv?

[raileanu]

Re: mytv te32

Thank you lotas it works perfectly.