Samsung Ps60E6500 power board bn44-00513A

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Alexsandu
    New Member
    • May 2021
    • 2
    • United Kingdom
    #1

    Samsung Ps60E6500 power board bn44-00513A

    Hello everyone, I have a Samsung Ps60E6500euxxu plasma TV with a burned-out power supply. The power supply is model Bn44-00513A. Both fuses blown, 1 of the FDPF 12N50T is cracked (we bought new ones to replace them) and there is a transistor and some resistors that I can't identify. These are the problems I found after the visual check.
    I am looking for the diagram of this power supply board or if anyone knows the type of parts to be replaced
    Thank you in advance
    Attached Files
    Tags: None
    • R_J
      Badcaps Legend
      • Jun 2012
      • 9535
      • Canada
      #2
      Re: Samsung Ps60E6500 power board bn44-00513A

      The components for QS804, gate drive should be the same. The resistor might be 22Ω. the diode could be KDS184
      Last edited by R_J; 05-06-2021, 07:10 PM.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • C152Heavy
          Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
          by C152Heavy
          Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

          Summary for TL-DR readers:
          • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
          • Have obtained Samsung schematic & service documents - Can upload if helpful.
          • Have read ALL applicable threads
          • C1818 and CP820 replaced as low hanging fruit
          • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
          • VCC pin (18) of PFC...
          01-11-2023, 02:53 PM
        • Destroyer-Br
          [HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
          by Destroyer-Br
          [HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH

          Hi everyone,

          I'm working on an Acer Nitro 5 unit with the following specs:
          • Motherboard: LA-J871P Rev: 1B
          • Model: Acer AN515-55-59MT
          • S/N: NHQ7JAL00403906A973400
          • SNID: 03902728734
          Initial Issue


          The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.

          After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled...
          04-17-2025, 08:18 PM
        • Nicktronic
          Samsung Power Supply Board BN44-00874F
          by Nicktronic
          Hey everyone,

          This power supply board is hard to find but there are repair kits available. This board had a blown fuse, FP801S, blown PFC MOSFET, QP802CS and ceramic cap, CP809. I replaced them with parts I already had and tested the rest of the parts that would've come in the repair kit and they were fine. I powered the board up on the bench expecting, in typical Samsung power supply board fashion, to see all my output voltages but, nothing. 0 volts on CNL801, CNM801 and CNT801. The only thing I have is 170vdc on the filter caps. No standby voltage either.

          Anybody...
          03-17-2025, 06:20 AM
        • Dani_2024
          Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
          by Dani_2024
          Hi and thanks in advance for any input you might provide!
          I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
          Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

          Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
          5 Photos
          10-28-2024, 05:06 PM
        • Loading...
        • No more items.
        Working...