Panasonic TH-50PX60U Plasma Black Bars

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • canadaboy25
    What is normal?
    • May 2013
    • 509
    • Canada

    #1

    Panasonic TH-50PX60U Plasma Black Bars

    Hey guys, I have a Panasonic plasma here with two black rectangles in the display. As you can see from the picture, they affect the menus as well. Both black rectangles extend to exactly the center of the screen. I'm not super familiar with the workings of the display driver layout. Would this indicate a bad ribbon connection on the top and bottom boards? The TV has ribbons along the entire top and bottom of the display.

    Any ideas are appreciated.
    Attached Files
    canadaboy25

    -Sometimes the light at the end of a tunnel is an on-coming train

Related Topics

Collapse

  • jm1234
    Panasonic plasma TX-P42ST50 - 6 blinks
    by jm1234
    Hi,
    anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
    It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
    I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
    I checked that board for any obvious faults...
    05-22-2024, 06:59 AM
  • stecos
    Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
    by stecos
    Hi everyone!
    I happened several times, in the search for help from the web, to consult this very interesting forum.
    So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

    Having said that I come to the gist of my post on the forum as the title suggests.
    For my passion for technology I'm now collecting several...
    11-28-2022, 11:39 AM
  • Lintesir
    Panasonic P42S30 Plasma - Pink sparkles
    by Lintesir
    My parents' Panasonic P42S30 died recently, and they asked me to have a look at it. I was able to identify the SN-board as the culprit, as it was shorted. After removing Q401, Q402, Q421 and Q422 the short was gone, so I replaced these components and that got the TV working again. However, when testing the tv a bit, I noticed quite bad pinkish sparkles on some colors. For instance the greyish bar on this forum seems to trigger it quite badly. I made a fullscreen test picture with only that color, with the below result.

    There is about a 5cm high region at the top without any sparkles,...
    07-26-2024, 03:16 AM
  • tofik
    PANASONIC TX-P42X10Y Plasma TV damaged after a power spike
    by tofik
    Hello, I have an PANASONIC TX-P42X10Y Plasma TV, purchased new in 2009.
    Unfortunately plasma is not working at all after a power spike. Standby LED is not even working.

    I did some quick tests, YSUS + ZSUS MOSFETS and IGBT's are free from shorts, diodes on these modules seems to also be fine, buffer board is free from shorts as well.

    Anyway I focused mainly on the PSU, did some voltage tests with the results as below, I attached them on the photo (also please see attached PDF with the SERVICE MANUAL for this model, page number 43).

    I understand...
    02-17-2023, 02:34 PM
  • SACR
    Panasonic Plasma TH-P42X28K A-Board @ Mainboard Schematic needed
    by SACR
    I need Schematic A-Board @ Mainboard for Panasonic Plasma TH-P42X28K. Code : TNPH0842. I want to replace 1 MLCC but I don't know values (capacitance & voltage) & codes. Can someone help me? Thank you...
    11-20-2023, 11:53 PM
  • Loading...
  • No more items.
Working...